1
Tech Talk / Re: TM250K gear oil drain plug
« on: March 17, 2017, 05:23:37 pm »
Thanks all for your help, I drained the oil today using the rear one, appreciate everyones advice. Craig
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Tech Talk / Re: TM250K gear oil drain plug
« on: March 16, 2017, 05:56:15 pm »
Thanks Doc, I have been given a couple of different answers, the old owner said the one at the front has a spring and cam so I figured it was the rear one. Cheers
3
Tech Talk / TM250K gear oil drain plug
« on: March 16, 2017, 12:35:56 pm »
Does anyone know which of the two plugs is the drain plug? One in the middle facing straight down, or the one at the front on an angle?
4
Tech Talk / Re: Ikon shocks any good?
« on: January 31, 2017, 09:38:06 pm »
Just don't want to see anyone else on here get the same result. Lot of money to throw away on a product I thought would be reasonable value, wasn't expecting Ohlins but expected them to last more than a couple of laps!
5
Tech Talk / Re: Ikon shocks any good?
« on: January 30, 2017, 09:10:15 pm »
I must be unlucky, bought a pair for my RM125B, they failed after a couple of rides, sent them back to Ikon (at my cost) they conceded there was a problem, rebuilt them and sent them back. Used a couple of times since, and they have failed again. One has lost damping and bottoms (locks up) after about 30mm travel (hit a hole in the track on the weekend and felt like I fractured my spine). Not going to waste my money sending them back again, have lost total faith in the product. Mate of mine bought a set, they leaked after first ride, they didn't want to know him. What a waste of money, cost me $700 and I am putting the 40 year old originals back on. Not happy.
6
Tech Talk / Ikon shocks any good?
« on: December 19, 2016, 03:00:10 pm »
Does anyone here have any feedback on Ikon shocks?
7
Wanted / Re: WANTED: 15" (380mm) rear shocks for RM250B
« on: November 28, 2016, 02:15:33 pm »
I tried to buy some new Gazi's for my RM125B. Happy with the price, asked him to build me a set but they just didn't seem interested. Told me it would take weeks to get the components etc and virtually didn't want my money. Gave up and went elsewhere.
8
Wanted / Forks wanted
« on: September 26, 2016, 04:22:10 pm »
Hi Guys, I have a mate in Melbourne who is looking to replace the front forks on his XR75.
It currently has 31 mm 1983 CR80 forks running a 19" front wheel but wants to make the bike eligible for PRE78.
Can anyone recommend a set of bolt in leading axle forks to suit this set up.
Research suggests Elsinore CR125, XL100 or XL185 or CT200 could be possible options.??
Preference would be a complete set including triple clamps.
Any help would be greatly appreciated.
It currently has 31 mm 1983 CR80 forks running a 19" front wheel but wants to make the bike eligible for PRE78.
Can anyone recommend a set of bolt in leading axle forks to suit this set up.
Research suggests Elsinore CR125, XL100 or XL185 or CT200 could be possible options.??
Preference would be a complete set including triple clamps.
Any help would be greatly appreciated.
9
For Sale / Re: Suzuki 1978 PE175C for sale
« on: July 06, 2016, 06:38:31 pm »
Anyone want pics, please PM me your email address and I will send some through. Cheers, Craig
10
For Sale / Re: Suzuki 1978 PE175C for sale
« on: July 06, 2016, 02:36:07 pm »
I do have pics, but not sure how to put them on here? Any tips?
11
For Sale / Suzuki 1978 PE175C for sale
« on: July 04, 2016, 02:14:18 pm »
Nice old PE for sale, recently had fork seals and new oil, brand new Battleax tyres, very reliable, good compression, starts easily, good gearbox, lights don't work, excellent for Vinduro or starting in VMX. Located in Brisbane $1,950 Phone or text 0437336545
12
For Sale / Yamaha YZ250G
« on: July 04, 2016, 02:07:28 pm »
Selling 1980 Yamaha YZ250G, a very nice bike with lots of money spent ie: new SM Pro rims and stainless spokes, rear shock rebuilt with Racetech gold valve and new spring, Racetech fork springs and emulators, new handlebars, cables, new carby, new seat, DG muffler, a well sorted and ready to race VMX evo 250. $4,500 located in Brisbane. Phone or text 0437336545
13
Competition / Re: Australian Classic Motocross Championships 2016
« on: June 22, 2016, 08:49:45 am »
I looked at those speeds too, it appears it adds the average speed per lap by the number of laps ie: if you averaged 40kmh each lap and did 3 laps it will show 120kmh. I know I wasn't hitting over 100kmh for sure!
14
For Sale / Re: For Sale or Swap ..1976 RM125A
« on: January 29, 2016, 09:50:04 am »
What is your location?
15
Trail & Track / Re: QMP - the worst trail ride you can ever have
« on: January 08, 2016, 04:18:50 pm »
Yep not good at all, I won't go back for the trails that's for sure...