1
Wanted / Re: Yamaha XT600 Wheels
« on: December 01, 2017, 08:56:25 pm »
i might have one if your still looking
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
3
Bike Transport / Re: Mount Barker, SA
« on: July 02, 2017, 09:21:35 pm »
i might be able to help out
4
Honda / Re: 85 xl 350 /83 xr 350
« on: May 18, 2017, 07:09:59 pm »
OK motor is in after many phone call and hrs on the computer i took both stators to a bike lec here in adelaide this guy knows his stuff can run ether stator in the bike
5
Honda / Re: 85 xl 350 /83 xr 350
« on: May 12, 2017, 06:50:20 pm »
not sure about the cranks xr 350 13000kfo000
xl 350 13000kv901
have to try the fly wheels out over the weekend
xl 350 13000kv901
have to try the fly wheels out over the weekend
6
Honda / Re: 85 xl 350 /83 xr 350
« on: May 11, 2017, 06:07:26 pm »
hope to get flywheel of this weekend and see if it fits then get it back together using the xr stator and flywheel fingers cross
7
Honda / Re: 85 xl 350 /83 xr 350
« on: May 10, 2017, 03:59:03 pm »
Have pulled both stators out and the xr stator bolts straight in the xl motor dont have a fly wheel puller so was thinking just change the stators over then the wires match up with the xr wiring loom
8
Honda / Re: 85 xl 350 /83 xr 350
« on: May 08, 2017, 06:26:29 pm »
Just been on the Cmnsl site Ghostdancing looked at part numbers the xl 350 stator 31120kg0004 flywheel 31110kg0008
xr 350 sttor 31120kf0004 flywheel 3110kf0004
not sure looks like they might be kfo is the xr 350 code for all its parts and kg must be the xl code just one number different on the fly wheels will pull motors apart and see unless some can enlighten me on this thanks
xr 350 sttor 31120kf0004 flywheel 3110kf0004
not sure looks like they might be kfo is the xr 350 code for all its parts and kg must be the xl code just one number different on the fly wheels will pull motors apart and see unless some can enlighten me on this thanks
9
Honda / Re: 85 xl 350 /83 xr 350
« on: May 08, 2017, 05:41:27 pm »
yeah i was thinking about the fly wheel as well will have to pull it apart and give it a go was thinking just cut and shut the wires coming out the stator on the xl 350 to suit the xr 350 wiring loom but not sure on this idea
10
Honda / Re: 85 xl 350 /83 xr 350
« on: May 07, 2017, 08:33:41 pm »
have put the xl 350 motor in the xr frame the wires from the stator are diffrent 5 wires on the xl and 3 from the xr so can anyone tell me if a 83/84 xr350 stator will fit a 85 xl 350 duel carby motor thanks
11
Honda / Re: 85 xl 350 /83 xr 350
« on: April 18, 2017, 07:23:45 pm »
yep bigger flywheel iam going use the carbys of the xl 350 with the motor to put in my xr 350 roller while i rebuild the old xr 350 motor just the wires are different coming out of the stator so not sure
12
Honda / Re: 85 xl 350 /83 xr 350
« on: April 11, 2017, 08:29:00 pm »
i read some were that the 1985 xl 350 mtor is a 83/84 xr 350 motor with twin carbys
13
Honda / 85 xl 350 /83 xr 350
« on: April 10, 2017, 09:25:50 pm »
Can any honda experts tell the difference between these two motors i just picked up a 85 xl350 to put the motor into my 83 xr 350 frame The cams would have to be different what about the crank and carbys the xl 350 runs very well no noises or rattles or smoke Looks like a direct transplant into the xr frame has any one done this before any advise would be great thanks
15
For Sale / xr 600 1990 RL
« on: November 25, 2016, 10:27:36 pm »
I have a complete xr 600 1990RL in pieces motor has been spilt due to gear box failure has another gear box with it missing cam and fuel tank good barrel and head all other parts are there happy to send pics to mobile as there would be a few would befer to sell as a whole but might part out AIM in south Australia but will be in ballarat on the 10/12/16 so happy to bring to there if that helps out pm me for details thanks jeff