61
Wanted / TY250 twinshock
« on: October 01, 2010, 05:14:44 PM »
Would like to pick up a TY250 - doesn't matter if its a non-runner or incomplete (but more-or-less complete would be nice)
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
62
Spaniards (Bultaco, Ossa, Montesa etc) / Pursang 68 & 120 engines for sale
« on: September 13, 2010, 09:31:53 AM »
Mk 4 & Mk7 250 Pursang engines for sale
PM if interested
PM if interested
63
5X8 175 barrel (67.5 bore)
43G 200 barrel
I'm not 100% sure of the following but as far as I know they are:
(They may fit other models too)
175 tank - D/E/F
250H/J tank
250H/J alloy swingarm (triangulated type)
175J alloy swingarm
200 alloy swingarm
PM if interested
43G 200 barrel
I'm not 100% sure of the following but as far as I know they are:
(They may fit other models too)
175 tank - D/E/F
250H/J tank
250H/J alloy swingarm (triangulated type)
175J alloy swingarm
200 alloy swingarm
PM if interested
64
For Sale / IT/YZ/MX & PE/TS barrels & heads
« on: September 01, 2010, 04:39:45 PM »
Need to pay some medical expenses (true)
PE175C barrel $65 OBO
PE250B barrel $50 OBO (some bent fins)
TS400 barrel $60 OBO side port - tame that TM
IT175DEF barrell & head $75 OBO
IT200 barrell $75 OBO
MX250B/YZ250C barrel & head $135 OBO
IT250D barrel & head $145 OBO
DT1M barrel $95 OBO
YZ250 A/B barrel - need an offer I can't refuse to part w this one
PM me if interested
PE175C barrel $65 OBO
PE250B barrel $50 OBO (some bent fins)
TS400 barrel $60 OBO side port - tame that TM
IT175DEF barrell & head $75 OBO
IT200 barrell $75 OBO
MX250B/YZ250C barrel & head $135 OBO
IT250D barrel & head $145 OBO
DT1M barrel $95 OBO
YZ250 A/B barrel - need an offer I can't refuse to part w this one
PM me if interested
66
Bike Transport / Cairns region to CD7
« on: May 26, 2010, 01:14:32 PM »
Anyone know of somebody travelling from Cairns region to CD7 who could take a frame for Stan?
67
General Discussion / 1500 Membership by CD7??
« on: April 26, 2010, 08:27:13 AM »
I seem to recall that we just made 1000 members before CD6.
Looks like we might make 1500 by CD7.
500 new members in the year is a great effort.
Thanks again Graeme for all your fine efforts
Looks like we might make 1500 by CD7.
500 new members in the year is a great effort.
Thanks again Graeme for all your fine efforts
68
Bike Talk / Any RUPPs in Oz?? eg RMXs
« on: April 16, 2010, 11:33:59 AM »
Does anybody know if any RUPPs came to Oz in early 70s?
They were big in minibikes/minicycles in early 70's but also made full-size RMX125 & 100's (yes, RMX, long before Suz used that moniker). Tank shape was similar to Penton. Here's a few pics
I saw a rolling chassis for a Hustler/Scrambler minicycle at a swap-meet about a decade ago, but I've never seen or heard of any RMXs here. Or any other models.
Has anybody else?
They were big in minibikes/minicycles in early 70's but also made full-size RMX125 & 100's (yes, RMX, long before Suz used that moniker). Tank shape was similar to Penton. Here's a few pics
I saw a rolling chassis for a Hustler/Scrambler minicycle at a swap-meet about a decade ago, but I've never seen or heard of any RMXs here. Or any other models.
Has anybody else?
69
Bike Transport / Young (in NSW) to CD7?
« on: March 22, 2010, 10:26:27 AM »
Anyone at (or near) Young in NSW going to CD7 who could bring up a rear wheel for me?
Thanks
Thanks
70
Tech Talk / Plastic tanks & taps
« on: March 16, 2010, 12:39:42 PM »
Gents,
The 70's aftermarket plastic tanks typically ran rubber grommets for the taps to fit into.
I've got a couple without grommets & taps.
Anyone know where to get such grommets & taps?
Or any other suitable solution?
Thanks
The 70's aftermarket plastic tanks typically ran rubber grommets for the taps to fit into.
I've got a couple without grommets & taps.
Anyone know where to get such grommets & taps?
Or any other suitable solution?
Thanks
71
Wanted / July 72 Minicycle mag - copy of article
« on: February 26, 2010, 04:49:46 PM »
Gents,
I'm chasing a copy/scan of an article in July 72 Minicycle mag. Does anybody have that issue who could scan me an article please?
Thanks
I'm chasing a copy/scan of an article in July 72 Minicycle mag. Does anybody have that issue who could scan me an article please?
Thanks
72
Italian (Moto Villa, Beta, SWM etc) / SWM frame
« on: December 28, 2009, 12:58:58 PM »
Anyone got (or know of) a spare frame for an SWM enduro they're willing to part with?
Prefer circa 77-80
Prefer circa 77-80
73
For Sale / PE175 barrel
« on: December 08, 2009, 10:16:07 AM »
PE175 barrel I don't need.
Its the model w the slightly skewed transfer ports (ie not symmetrical when view from bottom of barrel). Can email pics
Its the model w the slightly skewed transfer ports (ie not symmetrical when view from bottom of barrel). Can email pics
74
General Discussion / WA Grand National?
« on: December 07, 2009, 09:07:53 AM »
Can anyone tell me for sure if WA ran an annual Grand National in the 70s?
I know Vic did, but did WA?
I know Vic did, but did WA?
75
For Sale / YZ80 parts
« on: November 27, 2009, 10:31:19 AM »
As accurately as as I can determine the parts (from Yam michrofiche) I have ollowing available:
YZ80 J swingarm (may also fit other models)
YZ80 G/H/J rear wheel (no brake)
YZ80 E/F/G airbox
YZ80 E/F LHS plastic sidecover (fits airbox above)
Pics available via email
Reasonable offers
YZ80 J swingarm (may also fit other models)
YZ80 G/H/J rear wheel (no brake)
YZ80 E/F/G airbox
YZ80 E/F LHS plastic sidecover (fits airbox above)
Pics available via email
Reasonable offers