OzVMX Forum

Marketplace => Wanted => Topic started by: jimg1au on October 08, 2009, 07:47:41 am

Title: wanted triple clamps 36mm
Post by: jimg1au on October 08, 2009, 07:47:41 am

would like a set of yz250/400 c 1976 triple clamps but any set would do as long as the forks can slide through without hiting the bars
cheers

Title: Re: wanted triple clamps 36mm
Post by: TT5 Matt on October 08, 2009, 08:18:23 pm

aren't tt500c tripples the same?could widen your chances of finding some and the forks will slide through without hitting the bars

Title: Re: wanted triple clamps 36mm
Post by: jimg1au on October 08, 2009, 08:23:22 pm

tt500c arnt the same the bars are mounted further back on the yzc ones

Title: Re: wanted triple clamps 36mm
Post by: Noel on October 08, 2009, 08:49:15 pm

Jim,
the tripple's on my XT500D allow the forks to be slid up,
although the bars are mounted on bolt through clamps
but looking at the pictures in my manual the TT one's should allow the forks to slide past the handle bars any way
I'm wondering what you have?
HTH
Cheers
Noel

Title: Re: wanted triple clamps 36mm
Post by: Snowy 76 on October 08, 2009, 09:27:59 pm

Jim, might have something will have a look on the weekend.

Title: Re: wanted triple clamps 36mm
Post by: jimg1au on October 15, 2009, 08:21:46 am

anyone find a set

Title: Re: wanted triple clamps 36mm
Post by: motomaniac on October 15, 2009, 09:39:13 am

You need to post a photo because its not clear what you actually after. I have yz ones for leading axle type forks that allow the forks to slide up past the bars.

Title: Re: wanted triple clamps 36mm
Post by: jimg1au on October 15, 2009, 06:12:59 pm

the yz ones are from 1976 it as well 36mm forks not leading axle type
thanks