OzVMX Forum

Marque Remarks => Yamaha => Topic started by: YUMASTEPSIDE on October 07, 2009, 03:36:19 pm

Title: YZ250E
Post by: YUMASTEPSIDE on October 07, 2009, 03:36:19 pm

Anyone got any good pics of a 1978 YZ250 E ?   I've got one to rebuild and I can't find any decent pics on the web, they're all US ,yellow versions.

             Roger

Title: Re: YZ250E
Post by: Viper666 on October 08, 2009, 10:01:38 am

I have a scanned picture of the brocheur, I will send that tonight if I get time. If not tomorrow.
Viper666

Title: Re: YZ250E
Post by: cyclegod on October 08, 2009, 01:59:26 pm

(http://www.motodacross.com/yamaha/yz250/1978.jpg)

Title: Re: YZ250E
Post by: number 87 on October 09, 2009, 10:14:55 am

Hey YUMASTEPSIDE,
I have got a Yellow American model, bar the plastics they are the same as the Australian version,
probably more relevant to you I have parts book, service book and parts fiche so if you need copies,
part #'s and such, give us a shout.

Cheers
# 87 

Title: Re: YZ250E
Post by: YUMASTEPSIDE on October 09, 2009, 02:50:25 pm

Thanks '87, the first thing I need to know is the part numbers for the stator and rotor ..........can't seem to get the stator around far enough to time it properly,it may have the wrong setup on it.


            Roger
   

Title: Re: YZ250E
Post by: Viper666 on October 09, 2009, 05:13:09 pm

Stator assembly will have 2K7 stamped on the lower coils holder and the stator will have, from memory, M100-24 on it.

Part numbers are 2K7-85566-10-00 COIL, CHARGE 1      460 ohm +/- 10%
                        2K7-85567-10-00 COIL, CHARGE 2    1400 ohm +/- 10%
                        2K7-85510-10-00 STATOR ASSEMBLY
                        2K7-85550-10-00 ROTOR ASSEMBLY

I'll take a pic of mine if it is clear enough.

Set static timing by the marks at 1.7mm BTDC

Viper666