OzVMX Forum

Marque Remarks => Yamaha => Topic started by: firko on October 05, 2009, 11:16:30 pm

Title: Pre 70 project starter.
Post by: firko on October 05, 2009, 11:16:30 pm

Original Heaven secretary John Glendenning has this DT1-F up for grabs on eBay. It looks pretty much all there, all you'd need is a piston port barrel, a bit of ingenuity and a lot of patience and you're on your way. 
http://cgi.ebay.com.au/Yamaha-DT1F-dt-250_W0QQitemZ290354591818QQcmdZViewItemQQptZAU_Motorcycles?hash=item439a7b784a&_trksid=p3286.c0.m14 (http://cgi.ebay.com.au/Yamaha-DT1F-dt-250_W0QQitemZ290354591818QQcmdZViewItemQQptZAU_Motorcycles?hash=item439a7b784a&_trksid=p3286.c0.m14)

Title: Re: Pre 70 project starter.
Post by: jimson on October 05, 2009, 11:32:13 pm

Yes just looking at that I want the fuel tank as mine has a early 70s one and as mine is pre 70s it would finish it off then again I still need the square swing arm  :o jimson

Title: Re: Pre 70 project starter.
Post by: Freakshow on October 06, 2009, 01:16:37 am

i thought the Racing Swing arm thing was resolved ? PRe 70 can be either .....

Title: Re: Pre 70 project starter.
Post by: vandy010 on October 06, 2009, 03:25:29 am

cool bike that one...
if it were a little closer to me i'd be keen.
hey Jimson, the LT/AT/CT1 feul tank pretty much slips straight on too and is much slimmer.
just a thought should one present itself...

Title: Re: Pre 70 project starter.
Post by: jimson on October 06, 2009, 08:44:08 pm

DT went for $300 bargin if I had the cash it would be in my shed Freaky I'm a bit anal I want my DT1 to look pre 70 thats why I want the square swing arm.Thanks for the heads up on the fuel tanks Vandy.jimson

Title: Re: Pre 70 project starter.
Post by: Freakshow on October 07, 2009, 11:38:07 pm

ME too 300 is a steal, but the transport would have killed me.  Jimo you selling off any thing from that list you gave me spares wise ? PM me.