OzVMX Forum

Marque Remarks => KTM => Topic started by: Broadsta on October 05, 2009, 10:26:45 pm

Title: 84 125 jetting
Post by: Broadsta on October 05, 2009, 10:26:45 pm

was hoping someone could help us out with the jetting on my 84 125, its running a Dellorto phbe36ss, i'm guessing this is standard .most of the jets have been butchered  with a screwdrivr and cant read the numbers.  was going 2 buy new standard jets,who supplies parts 4 this type of carb?
Thks Simon.

Title: Re: 84 125 jetting
Post by: Lozza on October 06, 2009, 07:41:10 am

Delorto are a size jet like Keihins. So a 150 is a 1.50mm hole, if you have jets around the 160-180 range most kart shops that service the Rotax max will have them for $5 each. Alternatively you can go to an engineering shop buy a range of drills and drill out, solder up and drill out agin untill all is good.
HTH

Title: Re: 84 125 jetting
Post by: oz555ktm on October 07, 2009, 06:56:50 pm

Main jet  210

Needle Jet  270

idle Jet  50

Needle     U3

Title: Re: 84 125 jetting
Post by: Broadsta on October 08, 2009, 10:02:10 pm

Thanks guys