OzVMX Forum

Clubroom => Tech Talk => Topic started by: MTSEAN on September 25, 2009, 03:57:38 pm

Title: DT 360A
Post by: MTSEAN on September 25, 2009, 03:57:38 pm

I am having trouble finding a rod and/or rod kit for my 360. Have recently found pistons and crank seals with quite a bit of searching.  I would appreciate anybodys help or guidance as I have exhausted a lot of options including pro x and sirco.  I really need to find a genuine one if possible.

Title: Re: DT 360A
Post by: shanefz6 on September 25, 2009, 04:22:25 pm

Yamaha Part Num 24Y-11651-01  $142.60 RR. Has to come from Japan 2-3 weeks.
Its the Rod that i'm running in my RT1

Title: Re: DT 360A
Post by: cyclegod on September 25, 2009, 04:27:38 pm

http://cgi.ebay.com/ebaymotors/NOS-Yamaha-Connecting-Rod-1983-1989-YZ250-1985-TY350_W0QQcmdZViewItemQQ_trksidZp3286Q2em63Q2el1177QQhashZitem335579b897QQitemZ220477372567QQptZMotorcyclesQ5fPartsQ5fAccessories

Title: Re: DT 360A
Post by: MTSEAN on September 26, 2009, 08:19:51 am

cyclegod i hate to doubt your advice but are u sure that is the same rod before i buy it

Title: Re: DT 360A
Post by: Rossvickicampbell on September 26, 2009, 01:26:53 pm

I think he is right - I can't find it but we had another thread here on suitable rods before  - (will keep looking) - as I think it was an 83/89 YZ250 rod I put in my YZ360.

Will see what I can dig up.

cheers

Rossco

Title: Re: DT 360A
Post by: vandy010 on September 26, 2009, 01:34:45 pm

the 214 rod {DT/RT1,2,3 YZa/b 250/360} is different to the
     311 rod {DT/MX250/360a}
i just scored a N.O.S. rod to put into my MX250a. had to get the shims,bearing & pin seperately.
it all cost a bit more than i'd hoped but it's all ready for instalation and soon to be back on track again.
check if you can whether the big end pin is 24mm or 25mm and a good yamaha parts guy can sniff one out.
short for time right now but will post some more info when i can.

Title: Re: DT 360A
Post by: Rossvickicampbell on September 26, 2009, 01:43:38 pm

there ya go - just found the thread from September 07 - "1974 Yamaha YZ360B" - and the person who sprung to mind was Vandy!!!!!

cheers

Rossco

Title: Re: DT 360A
Post by: MTSEAN on September 28, 2009, 07:02:55 pm

Thanks for your help guys . Because of your advice I have been able to source all parts.