OzVMX Forum

Marketplace => Wanted => Topic started by: dave on September 24, 2009, 02:52:23 pm

Title: IT250H/J - YZ250G/H Gearbox bits or good bottom end wanted.
Post by: dave on September 24, 2009, 02:52:23 pm

I'm after a few bits for my IT250J (5L4)

* Shifter fork 3R4-18513-01 (rear closest to clutch side)
* GEAR, 5TH WHEEL (23T) 4V5-17251-00
* GEAR, 1ST WHEEL (32T) 2X7-17211-00
* GEAR, 6TH WHEEL (21T) 3R4-17261-02
* GEAR, 4TH WHEEL (25T) 4V5-17241-00
* Shifter shaft 5X5-18101-00
* Front brake backing plate 1W1-25121-02 (without cable locating lug broken off please  ;D)

Thanks
       

Title: Re: IT250H/J - YZ250G/H Gearbox bits or good bottom end wanted.
Post by: cyclegod on September 24, 2009, 03:20:30 pm

Here's what I've found...

http://cgi.ebay.com/ebaymotors/83-YAMAHA-IT-175-200-YZ-125-250-TT-500-FRONT-BRAKE-DRUM_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem4399fa90ccQQitemZ290346143948QQptZMotorcyclesQ5fPartsQ5fAccessories

http://cgi.ebay.com/ebaymotors/Yamaha-1982-YZ-250-490-IT-250-IT-465-Shift-shaft_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem3345817b05QQitemZ220209445637QQptZMotorcyclesQ5fPartsQ5fAccessories

Title: Re: IT250H/J - YZ250G/H Gearbox bits or good bottom end wanted.
Post by: cyclegod on September 24, 2009, 03:21:34 pm

And this...

http://www.cmsnl.com/products/fork-shift-3_3r41851301/

Title: Re: IT250H/J - YZ250G/H Gearbox bits or good bottom end wanted.
Post by: dave on September 24, 2009, 09:08:22 pm

Thanks cyclegod!!!!!!! However, I'd like to try getting it from someone here on the East coast first if possible.