OzVMX Forum

Marketplace => Wanted => Topic started by: Eza on September 23, 2009, 12:52:35 pm

Title: Pe 250 flywheel (80)
Post by: Eza on September 23, 2009, 12:52:35 pm

Have been trying to get one for ages unless someone has flywheel and stator off another pe.

Thanks.

Title: Re: Pe 250 flywheel (80)
Post by: cyclegod on September 23, 2009, 01:16:55 pm

Try here...http://www.cmsnl.com/suzuki-rs250-1980-1981-usa_model16225/partslist/90877.html

It's not cheap, but if you ask US wreckers for a stator and flywheel from a Suzuki RS250 (made in 80-81 and same part numbers as the PE) you might get lucky.

http://www.bikeboneyard.com/80%20pe-250.html

Title: Re: Pe 250 flywheel (80)
Post by: sudman on September 23, 2009, 05:36:13 pm

PE 175 fits as well, works good with 175 cdi makes it rev to the moon

Title: Re: Pe 250 flywheel (80)
Post by: LWC82PE on September 23, 2009, 07:18:46 pm

any other PE stator/flywheel (matched pair) will work, you just gotta move the timing slots 90 degrees.

Title: Re: Pe 250 flywheel (80)
Post by: TT5 Matt on September 25, 2009, 08:52:17 pm

Quote from: sudman on September 23, 2009, 05:36:13 pm

PE 175 fits as well, works good with 175 cdi makes it rev to the moon

hi sudman
whichmodel pe175 stator/rotor goes into the t/t pe250?

Title: Re: Pe 250 flywheel (80)
Post by: LWC82PE on September 25, 2009, 09:21:50 pm

Any 78-84. Need to make new slots in backing plate at 90 deg.

Title: Re: Pe 250 flywheel (80)
Post by: sudman on September 29, 2009, 05:55:57 am

I have a 1980 pe175 t  flywheel stator & CDI on my one