OzVMX Forum

Marketplace => Wanted => Topic started by: dave on September 15, 2009, 07:08:02 am

Title: IT250H/YZ250 Bits
Post by: dave on September 15, 2009, 07:08:02 am: I'm after a variety of bits for my IT250H and a YEIS bottle plus joiner pipe into the manifold is one of them. I'm also after a carbie for it and these bits;

*front brake hub backing plate
*gear shifter shaft
*front chain guide (front of swingarm)
*swingarm bearings/bushes
*front sprocket cover
*whole carbie or carbie slide spring/pilot jet/main jet/float
*conrod kit
*1.50mm OS Piston Kit
*cables (throttle/clutch/front brake)
*all engine oil seals and gaskets

Thanks Dave
Title: Re: IT250H/YZ250 Bits
Post by: Viper666 on September 15, 2009, 07:15:54 pm: Most of that stuff is available from Yamaha dealers.

*front brake hub backing plate Ebay or wreckers (Single leading edge) Do you want the speedo drive?
*gear shifter shaft Should be avail from dealer but can weld new end on http://cgi.ebay.com/ebaymotors/83-YAMAHA-YZ250-YZ-250-TRANSMISSION-GEAR-SHIFT-SHAFT_W0QQitemZ370246462125QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item563468aaad&_trksid=p3911.c0.m14 (http://cgi.ebay.com/ebaymotors/83-YAMAHA-YZ250-YZ-250-TRANSMISSION-GEAR-SHIFT-SHAFT_W0QQitemZ370246462125QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item563468aaad&_trksid=p3911.c0.m14)
*front chain guide (front of swingarm) On ebay all the time but I bought from dealer Yamatopdog (Speed & Sport USA)
*swingarm bearings/bushes Dealer (Expensive) Ebay or Yamatopdog http://216.168.60.165/speedandsportinc/index.tpl (http://216.168.60.165/speedandsportinc/index.tpl) or http://www.x-tremevintageyz.com/products.php (http://www.x-tremevintageyz.com/products.php)
*front sprocket cover Same as YZ, Ebay
*whole carbie or carbie slide spring/pilot jet/main jet/float Ebay
*conrod kit Definitely avail from dealer
*1.50mm OS Piston Kit Wuseco from dealer about $150-$175
*cables (throttle/clutch/front brake) Ebay or dealer
*all engine oil seals and gaskets Dealer

Use this link to chase part numbers

http://www.yamaha-motor.com/sport/parts/home.aspx (http://www.yamaha-motor.com/sport/parts/home.aspx)

Viper666
Title: Re: IT250H/YZ250 Bits
Post by: Viper666 on September 15, 2009, 08:17:24 pm: Bottle

http://cgi.ebay.com/ebaymotors/83-YAMAHA-IT250-YZ250-INTAKE-AIR-CHAMBER-BOOST-BOTTLE_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem1c082a7da1QQitemZ120396086689QQptZMotorcyclesQ5fPartsQ5fAccessories (http://cgi.ebay.com/ebaymotors/83-YAMAHA-IT250-YZ250-INTAKE-AIR-CHAMBER-BOOST-BOTTLE_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem1c082a7da1QQitemZ120396086689QQptZMotorcyclesQ5fPartsQ5fAccessories)

Shift shaft

http://cgi.ebay.com/ebaymotors/83-YAMAHA-YZ250-YZ-250-TRANSMISSION-GEAR-SHIFT-SHAFT_W0QQitemZ370246462125QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item563468aaad&_trksid=p3911.c0.m14 (http://cgi.ebay.com/ebaymotors/83-YAMAHA-YZ250-YZ-250-TRANSMISSION-GEAR-SHIFT-SHAFT_W0QQitemZ370246462125QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item563468aaad&_trksid=p3911.c0.m14)
Title: Re: IT250H/YZ250 Bits
Post by: dave on September 15, 2009, 08:57:29 pm: Thanks for the tips. I knew I could get these bits new. Just thought someone out there might be looking to offload old/new spares etc. Hey Viper have you dealt with X-TremeVintageYZ.com before? How long does it take to get bits?
Title: Re: IT250H/YZ250 Bits
Post by: Viper666 on September 15, 2009, 09:09:35 pm: Yes and they are good to deal with, their singarm kits are quality parts. Haven't bought other stuff but they have a good rep.

Viper666
Title: Re: IT250H/YZ250 Bits
Post by: Viper666 on September 15, 2009, 09:44:34 pm: This might help

http://www.yamahait.com.au/manuals.html (http://www.yamahait.com.au/manuals.html)
Title: Re: IT250H/YZ250 Bits
Post by: DIRTPILOT72 on September 15, 2009, 11:26:10 pm: I can get throttle, clutch, speedo cables. Full gasket kit, all bearings except swingarm, chain and sprockets, chain rollers. Pm me if you interested.