OzVMX Forum

Marketplace => Wanted => Topic started by: frostype400 on September 03, 2009, 09:29:04 pm

Title: Pe kill switch
Post by: frostype400 on September 03, 2009, 09:29:04 pm

I need one preferably two pe killswitches if you have any just pm me also after taillight and speedos thanks alot Michael. :)

Title: Re: Pe kill switch
Post by: lukeb1961 on September 09, 2009, 09:50:21 am

eBay - tons of 'em.  $9 each... 

Title: Re: Pe kill switch
Post by: frostype400 on September 09, 2009, 08:48:06 pm

yeah Luke i got excited for a second then till i realised you are talking about universals which i have a couple of again need to be original i have one where the red plastic has broken any other bikes suzuki that have the same red cover??

Title: Re: Pe kill switch
Post by: lukeb1961 on September 09, 2009, 09:45:05 pm

You want an original "witches-hat" T/X kill switch.
It helps if you actually state that. So...

NO, you haven't got a hope in hell of getting one NOS. Leith has been searching for years. They appear on eBay every year or so and go for US$150

Even if you find one (I have one) they are usually very brittle or already badly damaged. Live with a standard one, or one of the earlier style, which are easier to find. Else, find someone to make new ones. I was going to get Rob to make some right around when he burnt to the ground...   :(

Title: Re: Pe kill switch
Post by: frostype400 on September 09, 2009, 11:52:02 pm

I have one good and one average but i really need three good thanks Michael.

Title: Re: Pe kill switch
Post by: pmc57 on September 10, 2009, 05:42:40 pm

has anyone got a picture of the 'witches hat' T/X style

Title: Re: Pe kill switch
Post by: frostype400 on September 10, 2009, 07:34:08 pm

yes heres my only good one thanks Michael. :)

(http://i656.photobucket.com/albums/uu283/frostype400/DSC03512.jpg)

Title: Re: Pe kill switch
Post by: LWC82PE on September 10, 2009, 08:15:10 pm

Genuine has suzuki 'S' on top of rubber

Title: Re: Pe kill switch
Post by: TwoTees on September 10, 2009, 09:06:12 pm

Does it need to be red?

http://cgi.ebay.com/ebaymotors/81-SUZUKI-RM-125-KILL-SWITCH_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem53dce1790fQQitemZ360188049679QQptZMotorcyclesQ5fPartsQ5fAccessories#ht_610wt_939

Title: Re: Pe kill switch
Post by: pmc57 on September 10, 2009, 09:12:03 pm

I have a black one with the Suzuki 'S' on the rubber but the rubber is tapered not squarish like those pictured here, It also doesn't have a clamp. What could it be off?

Title: Re: Pe kill switch
Post by: LWC82PE on September 10, 2009, 10:03:49 pm

PMC57, i have one of those buttons. Black witches hat with suzuki logo. It was on a PE250 T and i feel it was original even though the sames brochure shows red. There were many options on the 1980 models regarding colour of horns, CDI units abd shock springs. There was probably half a dozen or more kill buttons suzuki had at the time and they would of put on what ever they had at the time. My 250Z had flat red button like frosty has shown and i reckon it was original because there are several differences between it and the aftermarket types you see. I think it was the melted black sheath to trhe wire. i think this was only done on the aftermarket switch or maybe the otherway around, i forgot, but one has it an one doesnt.

Title: Re: Pe kill switch
Post by: frostype400 on September 10, 2009, 10:55:20 pm

my broken one is red also but the plastic is gone the one in pic is good but i really need three good ones i mean black wouldnt matter if it is for sale i can use it thanks Michael. :)

Title: Re: Pe kill switch
Post by: frostype400 on September 10, 2009, 10:57:49 pm

Quote from: LWC82PE on September 10, 2009, 08:15:10 pm

Genuine has suzuki 'S' on top of rubber

i thought the one i have pictured was original?? i cant see the s i will have a close look tommorow