OzVMX Forum

Marketplace => Wanted => Topic started by: Doc on October 29, 2007, 03:21:28 pm

Title: Still more TM/TS75 bits needed..
Post by: Doc on October 29, 2007, 03:21:28 pm

I finally got the carb apart for the TS/TM75 after having it soaking for near 2 months   :o  low and behold it's completely rooted due to corrosion and human interference :-\ Needless to say I am now hunting a carb to fit a small bore rotary valve engine with the clamp cast onto the carb type spigot mounting. The stock carb is a whopping Mikuni vm16sc but I'd be willing to try any carb if it physically fits the space provided. TS100/TS90 are too big so I'm guessing a carb off an old 2smoke 50, 70 or 80cc yammie, kawa or zooki rotary valved steppy. Pocketbike carbs on ebay are unsuitable also..I already checked  ::) If you have something you may think could work I'd love to know as the bikes not going to run very well without one  ;) email [email protected] or message me here. Thanks

Title: Re: Still more TM/TS75 bits needed..
Post by: cyclegod on October 29, 2007, 03:52:29 pm

Is it this type doc?
http://cgi.ebay.com/ebaymotors/SUZUKI-carburetor-A80-A100-AS100-AFTERMARKET-NOS_W0QQcmdZViewItemQQcategoryZ35597QQihZ014QQitemZ330154552296QQrdZ1QQsspagenameZWDVW

Title: Re: Still more TM/TS75 bits needed..
Post by: Doc on October 29, 2007, 04:29:09 pm

mmm..thanks cyclegod, I have one of those and it's too big..right cable setup, shape and mounting just physically too big..that looks to be a VM19sc big block carberooster  ;)

Title: Re: Still more TM/TS75 bits needed..
Post by: LWC82PE on October 31, 2007, 08:43:30 pm

got plenty of head gaskets if you need some!

Title: Re: Still more TM/TS75 bits needed..
Post by: Doc on October 31, 2007, 10:22:00 pm

thanks Leith but I have the head gasket in stock.
I had it before I had the bike..an omen I believe  :)

Title: Re: Still more TM/TS75 bits needed..
Post by: cyclegod on November 01, 2007, 02:40:27 pm

Here ya go..... ;D
http://cgi.ebay.com/ebaymotors/Suzuki-TM-75-Carburetor-Assy-Used-Gc-1973_W0QQcmdZViewItemQQcategoryZ35597QQihZ009QQitemZ190168956630QQrdZ1QQsspagenameZWDVW

and he has LOTS more stuff too

Title: Re: Still more TM/TS75 bits needed..
Post by: Doc on November 01, 2007, 03:04:23 pm

beaudy! Thanks cyclegod! I'm onto it  ;D

late edit..carb is now a non issue..

still chasing a sprocket cover  :P