OzVMX Forum

Marque Remarks => Suzuki => Topic started by: DR500 on July 27, 2009, 03:16:57 pm

Title: suzuki rm 125d Jetting
Post by: DR500 on July 27, 2009, 03:16:57 pm

Anyone have the best basic jetting for a rm 125d.Have just put new carby on but it came with the following jets.
needle 6DP17
needle jet 159 Q6
pilot 35
main 200.
Bike has a DG pipe.
Thanks for any info.

Title: Re: suzuki rm 125d Jetting
Post by: suzuki27 on July 28, 2009, 05:18:12 pm

The standard settings for the 125D are: Jet needle: 6FP35
                                                      Needle jet: Q-6
                                                      Main jet:270
                                                      Pilot     : 30
                                      Throttle Slide cut-away: 2.0
                                                   Float level:12-13mm
                                              Pilot air screw: 1 1/2 turns out

Title: Re: suzuki rm 125d Jetting
Post by: DR500 on July 28, 2009, 08:51:50 pm

Thanks,that a great help.Have played a bit with it and 150 main seems right at the moment.I will see what happens when i get up to connondale

Title: Re: suzuki rm 125d Jetting
Post by: RMJJ on July 31, 2009, 07:20:31 am

Just out of interest, what is the new carb, is it a VM32ss or a normal VM32

Either way did you mean 250 main jet ?  150 seems very very small, I'm amazed it runs.

Title: Re: suzuki rm 125d Jetting
Post by: DR500 on July 31, 2009, 08:31:21 am

My typo error,main is 250.Carby is vm 32.Thanks