OzVMX Forum

Clubroom => Tech Talk => Topic started by: Expat on October 22, 2007, 06:47:40 am

Title: Bearings and bushes
Post by: Expat on October 22, 2007, 06:47:40 am
Are there aftermarket suppliers for the odd sized spherical bearings found in '85 KX rear suspension link rod?

Also having no luck finding the lower fat "DU" type bush in 43mm Kayaba forks.
Top bush under seal is avail from local bearing shop but the lower bush has coating on outside and bike shop wants $90+ each in NZ  :-\
Title: Re: Bearings and bushes
Post by: YSS on October 22, 2007, 09:18:24 am
The 43 bush we have for $50.00 a pair  and the others we need measurements . but should be able to help
Title: Re: Bearings and bushes
Post by: BONEHEAD on October 28, 2007, 08:00:59 pm
YSS,THE BUSHES ON THE BOTTOM OF MY 43MM YAMAHA FORKS ARE CACTUS, ARE YOU ABLE TO ADVISE ME WETHER YOU HAVE THEM IN STOCK, THESE ARE THE LOWER BUSHES , I MANAGED TO GET THE TOP BUSHES GENUINE FOR A STING IN THE HIP POCKET, YOUR HELP IS MUCH APPRECIATED CHEERS. ;D sorry about the capitols.   YZ 250 H 1981 43MM FORKS
Title: Re: Bearings and bushes
Post by: Freakshow on October 29, 2007, 12:16:22 pm
While we are all at it, Whats the go with swing arm bushes ? both my MXa yamahas are getting a bit of a wobble in there and i assume they are some kind of bush or sleeve, getting harder to get throught scrutinerring, and im running out of grease  :D
Title: Re: Bearings and bushes
Post by: cyclegod on October 29, 2007, 02:24:27 pm
I just bought some bronze bushes for my MX swingarm , they are for RD350's , I have been informed that they fit, but just in case they don't I have some OEM on stand by (I will measure and compare the two when they arrive). Oh, I got them from HVC cycle on ebay.
Title: Re: Bearings and bushes
Post by: Freakshow on October 29, 2007, 04:37:04 pm
Keep me poted on that, might be a good xmas precent to self.
Title: Re: Bearings and bushes
Post by: cyclegod on November 02, 2007, 05:47:28 pm
I just got the new Bronze swingarm bushes from HVC cycle and the are a perfect match for the MX250 ones I got from Yamaha  ;D ;D ;D
So if anyone is in need of some bushes for their Yammie MX then here you go...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=005&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=150172738538&rd=1
Title: Re: Bearings and bushes
Post by: Freakshow on November 02, 2007, 10:19:52 pm
What where they landed ? what are the Yam ones worth ?
Title: Re: Bearings and bushes
Post by: cyclegod on November 03, 2007, 12:24:06 am
The plastic yammie ones are worth $20 each, the HVC ones cost $54.50US (~$60AU) landed (by airmail it took 10 days)
"quality costs more" as they say. I have a NOS inner bush and it is a nice smooth fit in the bronze bush with a little grease added, I dare say I won't have any wobble issues with the swingarm again.