OzVMX Forum

Marque Remarks => Suzuki => Topic started by: TT5 Matt on July 09, 2009, 10:05:43 pm

Title: rm125s parts needed
Post by: TT5 Matt on July 09, 2009, 10:05:43 pm

hi all
finally got over to blacktown to pick up my rm125s i bought off epay 18 months ago and because it had been taken apart to replace the kick start pawl and never got back together again and been sold on to serveral mates theres a few bits missing or need replacing like in air filter element,piston pin,small end bearing,carb to airbox boot and a heap of screws/bolts etc i should be able to find at the local wreckers soo has anyone got any leads on those parts,at least it came with a undamaged maggie cover[like finding rocking horse shite] but no pipe with a tight as std bore so should make a good racer/restorer

TT5 Matt

Title: Re: rm125s parts needed
Post by: oldyzman on July 10, 2009, 10:22:02 pm

I believe the piston pin and little end is the same as TS125, as for the air filter and the rubber, I just run a pod direct to the carb straight into the airbox on My RM125S
Brett

Title: Re: rm125s parts needed
Post by: TT5 Matt on July 11, 2009, 01:39:05 am

i like pods as well but i wanted to put this bike back to factory specs as it done little work,ive got a second bike which is a bitsa but mainly rm with ts185a alloy rims for riding about on, i checked alpha sports site and they still do alot of much needed parts just got to wait till the oz $ goes up or get a price off the local suzuki dealer


TT5 Matt

Title: Re: rm125s parts needed
Post by: cyclegod on July 18, 2009, 09:25:18 am

Hey matt, keep an eye on this sellers store and you may find a bargain like I did...... ;D ;D ;D

http://cgi.ebay.com/ebaymotors/Suzuki-RM100-RM125-TM100-TM125-Magneto-Cover-Nos_W0QQcmdZViewItemQQ_trkparmsZ65Q3a10Q7c66Q3a4Q7c39Q3a1Q7c293Q3a1Q7c294Q3a200QQ_trksidZp3286Q2ec0Q2em14QQhashZitem45ed1f6265QQitemZ300331000421QQptZMotorcyclesQ5fPartsQ5fAccessories

Title: Re: rm125s parts needed
Post by: TT5 Matt on July 18, 2009, 09:59:38 am

c/god is that cover number 3?thanks for the lead maybe ill get lucky one day,got a ts125a damaged cover [busted bottom corner] yeasterday for less than $20 landed from pommy land that will do as a race cover but theres alot of people chasing them and your one of the quick guys that go to bed to the puter still going on wake me up mode!!!

Title: Re: rm125s parts needed
Post by: bazza on July 19, 2009, 06:38:50 pm

try Chris at RMS engineering in NZ