OzVMX Forum

Marque Remarks => Spaniards (Bultaco, Ossa, Montesa etc) => Topic started by: sudman on June 18, 2009, 06:34:18 pm

Title: VR250
Post by: sudman on June 18, 2009, 06:34:18 pm
Can someone please tell me what changes were made between 1975 to 1977 to this great bike.
Thanks
Title: Re: VR250
Post by: All Things 414 on June 18, 2009, 07:13:06 pm
Well...... The VR's actually stopped in '74. The '75 model was the V-75 (duh) and the only real difference was that the shocks laid forward a lot more and had reservoirs on them. It also had white guards. Not much difference between that and the VA ('76) but then the first VB came along in 1977 with longer suspension, an up-pipe and a killer motor. I'm sure someone else can put the pics up or just have a look on the Southwest Montesa site.  ;)
Title: Re: VR250
Post by: sudman on June 18, 2009, 07:40:48 pm
Hey thanks for that I have been offered a 77 & was told that it was the same from 75 to 77, I know little about Montesa's but love the lines, I currently have lots of Suzuki & Honda's
Cheers
Tony
Title: Re: VR250
Post by: All Things 414 on June 18, 2009, 07:43:25 pm
Snap it up my friend. If you don't then just PM me about it. Just me. Nobody else. Ssshhh!  ;)
Title: Re: VR250
Post by: mx250 on June 18, 2009, 07:55:14 pm
Hey thanks for that I have been offered a 77 & was told that it was the same from 75 to 77, I know little about Montesa's but love the lines, I currently have lots of Suzuki & Honda's
Cheers
Tony
Does it look anything like this....

(http://i323.photobucket.com/albums/nn458/mx250syd/VB.jpg)
Title: Re: VR250
Post by: All Things 414 on June 18, 2009, 07:57:33 pm
Sorry but I think that's the '78... :P
'77 should have the rear frame loop and the muffler should be under the seat.
Title: Re: VR250
Post by: mx250 on June 18, 2009, 08:13:09 pm
Sorry but I think that's the '78... :P
'77 should have the rear frame loop and the muffler should be under the seat.
Yeah I know that, but if it vaguely like this one it ain't a VR ;) 8).
Title: Re: VR250
Post by: All Things 414 on June 19, 2009, 06:36:28 am
If it was vauegly like Jeff's bike, I'd be paying ten grand for it. More!.... ;D ;)
Title: Re: VR250
Post by: cappra on June 19, 2009, 08:20:36 am
The darn guy has a fleet!
2-414's or is it 3?
3-VB's
and 1 VR...
Title: Re: VR250
Post by: sudman on June 24, 2009, 06:05:13 pm
Ok it's a 250 Enduro engine number 54m4851 frame ARD-N0-28 enduro 250 Montesa 54m4851, does anybody know this model & was it any different to 1975 & 1976 model in regards to the engine?

Thanks
Title: Re: VR250
Post by: cappra on June 24, 2009, 06:46:12 pm
Motor was the same for those two years.  No major change in the Enduro motor until 1977
when they went to a 6 speed trans.  Your Enduro, could be an A, H or K model from 1974 to 1976.
Title: Re: VR250
Post by: paul on June 25, 2009, 07:35:48 pm
so are they all fixed
Title: Re: VR250
Post by: paul on June 25, 2009, 07:47:12 pm
http://www.vintagemx.us/cgi-bin/largephoto.cgi?C=yKdWN2Myr3e9xm8p
Title: Re: VR250
Post by: All Things 414 on June 25, 2009, 08:00:53 pm

Yes. All fixed. The pictures I was putting into photobucket were too large. I downloaded a resizer and now all is good.
Do you think I should do a before and after topic on this poor VB 360?
(http://i235.photobucket.com/albums/ee74/All_things_414/DSCN0589Medium.jpg)
Title: Re: VR250
Post by: paul on June 25, 2009, 08:02:29 pm
haven.t you allready done one here on that bike
Title: Re: VR250
Post by: All Things 414 on June 25, 2009, 08:06:53 pm
It didn't last long. I can go further in-depth and tell how I had to battle lions along the way. And how that Greek beauty tried to seduct me whilst her co-conspiriters tried to sneak the bike away.
It'd make a nice distraction from all the crap that's going on about footpegs (again!)
And could people please note that I haven't bought into that argument at all (although it got too much for someone we know.... :D)
Title: Re: VR250
Post by: paul on June 25, 2009, 08:09:41 pm
foot peg springs has turn into state off origin.last time i looked some one was looking for a lump off wood
(http://i382.photobucket.com/albums/oo263/ozmaico/cid_D3B736E65E28483F995558E8A3B9968.gif)
Title: Re: VR250
Post by: firko on June 25, 2009, 10:10:50 pm
Quote
(although it got too much for someone we know.... )
And it didn't take long for you to find an excuse to have a shot at me again. Please leave me alone Ross. ::)
Title: Re: VR250
Post by: Freakshow on June 26, 2009, 03:13:19 pm
MAybe he meant me............ i was in there, but got out soon after we won the spring debate, but i thnk walter is still in there talking about michael jackson
Title: Re: VR250
Post by: All Things 414 on June 26, 2009, 05:01:17 pm
Quote
(although it got too much for someone we know.... )
And it didn't take long for you to find an excuse to have a shot at me again. Please leave me alone Ross. ::)

You led yourself into that one Mark....... ;)