OzVMX Forum

Marketplace => Wanted => Topic started by: Nathan S on June 13, 2009, 10:39:17 pm

Title: Sidepipe CZ or square-barrel Maico.
Post by: Nathan S on June 13, 2009, 10:39:17 pm

For once in my life, I have some spare cash, and you know what they say about a fool and his money...  :-[ :D

250 or open classer, either is fine.

I'm prepared to look at race-ready or project bikes, provided the price is reasonable...

If you've got something, then ring me and we can talk.

Nathan.
04000 23847

Title: Re: Sidepipe CZ or square-barrel Maico.
Post by: paul on June 13, 2009, 10:51:32 pm

what size are you looking for  nathan / whats your email

Title: Re: Sidepipe CZ or square-barrel Maico.
Post by: Nathan S on June 13, 2009, 10:59:14 pm

npsenior@@yahoo.com.au

(That has an obvious, deliberate mistake in it, to upset the spam bots).

250 or open, doesn't really matter - I'd probably be faster on a 250...

Title: Re: Sidepipe CZ or square-barrel Maico.
Post by: paul on June 13, 2009, 11:01:09 pm

i sent a test email ,             [email protected]
ive got 2  squaries ,i havent got any 250's though
i project bike for sale ( a 400) narrow frame
i think you have allready seen it before
nice un molested frame good forks tank seat base front wheel .complete bottom end that hasent been apart (yet)good barrell and head with nice straight fins  air box and air filter fittings and cage two pipes that you can mke a good one out off
rear hub brake plate  brake pedal foot pegs rear mudcatcher rim handel bar levers carb and what other bits and pieces 
needs complete resto needs some tlc and would be a valuable bike
or ive got a complete bike
(http://i382.photobucket.com/albums/oo263/ozmaico/IMGP2773.jpg)

Title: Re: Sidepipe CZ or square-barrel Maico.
Post by: paul on June 13, 2009, 11:22:45 pm

or
http://cgi.ebay.com.au/Maico-250-Square-Barrel-VMX-Vintage-Moto-Cross_W0QQitemZ230348947258QQcmdZViewItemQQptZAU_Motorcycles?hash=item35a1ddff3a&_trksid=p3286.c0.m14&_trkparms=65%3A1%7C66%3A2%7C39%3A1%7C240%3A1307%7C301%3A1%7C293%3A1%7C294%3A50

Title: Re: Sidepipe CZ or square-barrel Maico.
Post by: jimg1au on June 14, 2009, 07:35:44 am

nathan
here is the 250 again from camden nsw

http://cgi.ebay.com.au:80/ws/eBayISAPI.dll?ViewItem&item=230348947258&ssPageName=ADME:B:SS:AU:1123

Title: Re: Sidepipe CZ or square-barrel Maico.
Post by: paul on June 14, 2009, 08:49:21 am

im booked in mick that all i can do



plus in reguard to to above post ,the funny thing is i know what your talking about :o who gave you that dog friend or foe it looks like a seat chewer to me .be care full were you park it .you might come out with a few frames missing looks like some one has cut the antlers off the beast

Title: Re: Sidepipe CZ or square-barrel Maico.
Post by: Rosco400 on June 14, 2009, 09:05:12 am

Buy the Maico Nathan, there can then be no excuses :P

Title: Re: Sidepipe CZ or square-barrel Maico.
Post by: paul on June 14, 2009, 12:13:51 pm

the project bike 2600 or with all the other square barrell parts (not pictured) which include a fair bit off stuff  3500

Title: Re: Sidepipe CZ or square-barrel Maico.
Post by: Rosco400 on June 14, 2009, 04:31:25 pm

The square barell will qualify pre 70 and if not enough bikes for pre 70 you can ride it pre 75 250 & open