OzVMX Forum

Marque Remarks => Yamaha => Topic started by: lms6201 on May 18, 2009, 05:50:28 am

Title: 465 intake , is it still available from yamaha ?
Post by: lms6201 on May 18, 2009, 05:50:28 am

or can u get them elsewhere ?   thanks   

Title: Re: 465 intake , is it still available from yamaha ?
Post by: YZ250H on May 18, 2009, 02:47:31 pm

Pretty sure it is the same as 250G and 465G.  Have you tried the usual suspects - NW vintage cycle parts, speed and Sport etc.  I imagine all dry gullies though  :(
I'm going to try to cast my own for the 250H.  If it goes well I could try one for the 465 as well.  You would need to borrow a good (new if possible example).
I may be counting my chickens here, so I suggest you continue the search.  I know how it feels  ;)

Title: Re: 465 intake , is it still available from yamaha ?
Post by: cyclegod on May 18, 2009, 02:52:16 pm

You can get new ones here http://www.yamahaspares.uk.com/offroad.html but they have the boost bottle bit as well.

Title: Re: 465 intake , is it still available from yamaha ?
Post by: YZ250H on May 18, 2009, 03:06:34 pm

You are forking kidding me aren't you CG ??  The only place in the frickin universe I haven't looked and you put it up in 20 seconds  ;D ;D ;D

Title: Re: 465 intake , is it still available from yamaha ?
Post by: lms6201 on May 18, 2009, 06:26:17 pm

good thing i asked hey !! thanks cg

Title: Re: 465 intake , is it still available from yamaha ?
Post by: YZ250H on May 18, 2009, 06:32:39 pm

They call it Reed rubber - you reckon that is pommy for intake manifold ??
I have sent an email asking for pics etc, so will see what happens

Title: Re: 465 intake , is it still available from yamaha ?
Post by: holeshot buddy on May 18, 2009, 09:08:52 pm

run a boost bottle manifold
with a boost bottle they run really well
better bottom end and midrange
i run a yz250 tank on mine so i can fit
boost bottle in its rightfull home
where its happy ;D ;D

no iridium plug though ;)

Title: Re: 465 intake , is it still available from yamaha ?
Post by: lms6201 on May 19, 2009, 06:56:06 am

yz250 if your going to order one can u get me one , i don,t have a card , can pay u up frount , boost bottle sounds good

Title: Re: 465 intake , is it still available from yamaha ?
Post by: YZ250H on May 19, 2009, 07:28:37 am

No worries - I will let you know what they come back with

Title: Re: 465 intake , is it still available from yamaha ?
Post by: AdamN on May 19, 2009, 07:50:55 am

They quoted me 43.50 Pounds posted to Sydney. 465 one with boost bottle nipple.

Adam

Title: Re: 465 intake , is it still available from yamaha ?
Post by: YZ250H on May 19, 2009, 09:25:56 am

Did you go for it ?  Was it NOS or aftermarket ?

Title: Re: 465 intake , is it still available from yamaha ?
Post by: YZ250H on May 20, 2009, 07:58:30 pm

OK - finally someone that provides frickin service for a change  8):
Photos attached - I will get them to Aus then get one to you.
I have a request for a quote for 2 with him at the moment.  They look to be the go.  I have also asked if the installed tube comes out to take the standard fittings.  By the look of them they look to be exactly the same as what XYZ were thinking about offering.  Let me know if you want to continue.  I can probably help you out with a (not that pretty) boost bottle if you want one.  I will be going ahead anyway as it's the closest thing I have come across.  CG has saved the day again  8)
Cheers
(http://i202.photobucket.com/albums/aa49/tbarsby/reedrubber001.jpg)
(http://i202.photobucket.com/albums/aa49/tbarsby/reedrubber002.jpg)
(http://i202.photobucket.com/albums/aa49/tbarsby/reedrubber003.jpg)

Title: Re: 465 intake , is it still available from yamaha ?
Post by: YZ250H on May 21, 2009, 07:31:47 am

So the one in the picture is for the 465 - it gas a bigger tube (apparently).  The 250 one has a smaller tube.  I will be getting one for the 250.  Do you want 465 or 250 ?  75 pounds delivered for the 2.