OzVMX Forum

Marque Remarks => Yamaha => Topic started by: Quicksilver on May 16, 2009, 09:59:40 am

Title: YZ360A.?
Post by: Quicksilver on May 16, 2009, 09:59:40 am

Yammy men.
I have in my brake plate pile a rear brake plate that was marked "early YZ" with question mark after.
It has "Magnesium" embossed on outside edge of the plate. Also the embossed number on the inside is 2x400. Any idea's as to what it is?

Title: Re: YZ360A.?
Post by: brent j on May 16, 2009, 11:00:27 am

The info I have says YZ250F (79)

Title: Re: YZ360A.?
Post by: vandy010 on May 16, 2009, 12:05:30 pm

hey Quicky,
the brake shoe diameter should be around the 160mm mark and that backing plate was fairly common to quite a few models that came after the early YZ's {later YZ's and IT's etc}.
still a nice item though.

Title: Re: YZ360A.?
Post by: Quicksilver on May 16, 2009, 12:14:19 pm

Thanks guys. Only thing I had to ID was what was written on it "Early YZ". I guess in the scope of things its still an early YZ , just not what we would referr to as early. ;)
Has no shoes Vandy. Anyone want it? $25.  :) Shes got no chips or cracks but is bare with no fittings or shoes.

Title: Re: YZ360A.?
Post by: jimg1au on May 16, 2009, 12:30:45 pm

derw
shoot me off some pics i am looking for a brake plate for my yz400 rear wheel
cheers
jim

Title: Re: YZ360A.?
Post by: jimg1au on May 16, 2009, 12:32:58 pm

if it is the same as this i will have it
cheers
jim

Title: Re: YZ360A.?
Post by: Quicksilver on May 16, 2009, 01:19:23 pm

Bingo Jim. Thats the one. ;)

Title: Re: YZ360A.?
Post by: jimg1au on May 16, 2009, 03:18:49 pm

yz250f 1979 do you have any brake arms and cams that might fit the backing plate
cheers

Title: Re: YZ360A.?
Post by: Quicksilver on May 16, 2009, 03:47:42 pm

nope . sorry mate

Title: Re: YZ360A.?
Post by: Freakshow on May 21, 2009, 02:14:16 pm

Hey talking of YZ 360a, i have access to the barrell, but who was the pinapple man who had the bottom end on here ?

we both seem to have half the puzzle you interested in coughing up yet ? or should i be selling to you ?

Title: Re: YZ360A.?
Post by: holeshot buddy on May 21, 2009, 08:48:26 pm

ill take the barrel and bottom end
off both of you ;D ;)

Title: Re: YZ360A.?
Post by: Freakshow on May 21, 2009, 10:39:30 pm

Hole shot i thought you had the bottom end ? or did it end up being a Rt ?

now then will an Rt bottom end fit  :-\

wouldnt feel the same ;D

but for the right money anythings for sale, 432 with chrome bore, unless you plan on steel sleeving probally smarter

Title: Re: YZ360A.?
Post by: holeshot buddy on May 22, 2009, 10:21:03 pm

yeah its an rt1 bottom end
would like to get a yz engine
pretty hard though i will have to keep looking :o