OzVMX Forum

Marketplace => Wanted => Topic started by: frostype400 on May 06, 2009, 09:47:23 pm

Title: mx gt80 inlet manifold
Post by: frostype400 on May 06, 2009, 09:47:23 pm

need the inlet manifold off one of these in good condition the type where the oil tube presses on and im after a gasket set aswell thanks Michael. :)

Title: Re: mx gt80 inlet manifold
Post by: LWC82PE on May 06, 2009, 09:57:51 pm

have you tryed a yamaha dealer? Be careful getting second hand ones as most will be rock hard.
If you know the part number there is a few sites you can look up the number to see if they are available

Title: Re: mx gt80 inlet manifold
Post by: frostype400 on May 06, 2009, 10:03:57 pm

i have just emailed a dealer who has helped me before i need lots of little bits preferably nos i nearly have everything thanks Michael. :)

Title: Re: mx gt80 inlet manifold
Post by: LWC82PE on May 06, 2009, 10:08:53 pm

is this what it looks like
http://cgi.ebay.com/ebaymotors/1973-YAMAHA-GT80-GT-80-MX-INTAKE-MANIFOLD-YZ-100_W0QQitemZ280335530113QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item41454cb881&_trksid=p4506.c0.m245&_trkparms=72%3A1205%7C65%3A12%7C39%3A1%7C240%3A1318

Title: Re: mx gt80 inlet manifold
Post by: Tim754 on May 06, 2009, 10:54:48 pm

If you are stuck I should have a most likely 2nd hand freebie for ya. Cheers Tim

Title: Re: mx gt80 inlet manifold
Post by: frostype400 on May 07, 2009, 07:55:32 am

yep thats what they look like except it should have a nozzle sticking out the top to push the oil line onto i should be able to get  a nos one hopefully if i cant i will let you Tim thanks Michael. :)