OzVMX Forum

Marque Remarks => Yamaha => Topic started by: crossedup2 on April 28, 2009, 09:44:15 pm

Title: Clutch Springs for a YZ125X
Post by: crossedup2 on April 28, 2009, 09:44:15 pm

Hi All

Anyone know where I'd find heavier clutch springs for a 125X or alternatively is there a later yamie model that has heavier springs that would fit.
Eg. the trick springs to put in a TTR250 are XS650!
Is there any solutions apart from spacing the springs out with washers (which is already done)?

PB

Title: Re: Clutch Springs for a YZ125X
Post by: Nathan S on April 28, 2009, 10:06:56 pm

Do you need stiffer springs, or just less rooted ones?

How long are your current springs?

Title: Re: Clutch Springs for a YZ125X
Post by: DJRacing on April 29, 2009, 03:47:59 pm

Nathan has a point here, measure your springs and check that they are within tolerences and then make up your mind as to if you need heavier clutch springs.

Title: Re: Clutch Springs for a YZ125X
Post by: LWC82PE on April 29, 2009, 04:27:24 pm

Barnett and EBC make heavy duty clutch springs for most models. They are around 10-15 % stiffer.

Title: Re: Clutch Springs for a YZ125X
Post by: DG 26 on May 01, 2009, 09:07:18 pm

crossedup2 neads heavy springs ? alot of weight to drag around  ;D