OzVMX Forum

Marketplace => Wanted => Topic started by: 090 on April 28, 2009, 07:44:15 pm

Title: CR250 '99 Ohlins Forks
Post by: 090 on April 28, 2009, 07:44:15 pm
Wanted for my latest acquisition, my modern ride.
Title: Re: CR250 '99 Ohlins Forks
Post by: magoo on April 28, 2009, 09:21:43 pm
Awesome, the Pre 2000 class. Can't wait.
Title: Re: CR250 '99 Ohlins Forks
Post by: Hornet on April 28, 2009, 09:28:31 pm
Are going to have this new class at the nats now ?
Title: Re: CR250 '99 Ohlins Forks
Post by: E74 on April 28, 2009, 09:46:26 pm
probably can help, leave this one with me, I'll be back to you shortly... ;)
Title: Re: CR250 '99 Ohlins Forks
Post by: 090 on April 28, 2009, 10:21:26 pm
Quote from: E74 on April 28, 2009, 09:46:26 pm
probably can help, leave this one with me, I'll be back to you shortly... ;)
Oh! I shall be a waiting.
Quote from: magoo on April 28, 2009, 09:21:43 pm
Awesome, the Pre 2000 class. Can't wait.
Ah, missa magloo! Unfortunately she wont qualify as shes got  a 2000 model heart of the big bore kind!
Title: Re: CR250 '99 Ohlins Forks
Post by: caps 999 on April 28, 2009, 10:30:28 pm
i have a set to fit an 04 crf250 they may cross over
Title: Re: CR250 '99 Ohlins Forks
Post by: 090 on April 29, 2009, 12:39:00 pm
Quote from: caps 999 on April 28, 2009, 10:30:28 pm
i have a set to fit an 04 crf250 they may cross over
Can you measure diameter of forks where top and bottom clamps go? Also distance between bolt holes for brake caliper mount?
Title: Re: CR250 '99 Ohlins Forks
Post by: SUZUKI311 on April 29, 2009, 08:32:59 pm
caliper bracket mounting hole spacing is different from the 04 model on, easy fix, just replace the mounting bracket with an earlier model one. calipers are same, only bracket different, found out in 2004 when i went to put oversize rotor from my 03 onto my 04, bracket fitted to caliper no worries, but mounting holes were slightly further apart on the fork leg.
Title: Re: CR250 '99 Ohlins Forks
Post by: 090 on April 29, 2009, 08:55:31 pm
Thanks bud. Still anxiously awaiting an answer from either!
Title: Re: CR250 '99 Ohlins Forks
Post by: JohnnyO on April 29, 2009, 09:19:57 pm
If they are different Brad you can get a complete '04 caliper pretty cheap on ebay. That's what i did with mine. Otherwise you can buy just the bracket like 311 said.
Title: Re: CR250 '99 Ohlins Forks
Post by: caps 999 on April 29, 2009, 11:22:02 pm
rang cramers today the ohlins gurus in aus told me theres a differnce in the head tubes between those 2 models
Title: Re: CR250 '99 Ohlins Forks
Post by: 090 on April 30, 2009, 05:34:08 am
How much do you want for them to start with.
A difference does not necessarily mean they wont fit.
I take it when you say "head tubes",you mean a difference in the goose neck?
Title: Re: CR250 '99 Ohlins Forks
Post by: caps 999 on April 30, 2009, 10:37:55 am
they are asking $3000 im selling them for a mate they were used in the mxnationals in 04 on his  crf and not used since i think youl just need to het the head stock for the tripples as i believe there interchangeble
Title: Re: CR250 '99 Ohlins Forks
Post by: NSR on April 30, 2009, 09:56:41 pm
Brad
PM sent
Noel
Title: Re: CR250 '99 Ohlins Forks
Post by: 090 on May 01, 2009, 12:32:01 pm
Quote from: caps 999 on April 30, 2009, 10:37:55 am
they are asking $3000 im selling them for a mate they were used in the mxnationals in 04 on his  crf and not used since i think youl just need to het the head stock for the tripples as i believe there interchangeble
Thats more than im willing to part with thanks all the same.
Title: Re: CR250 '99 Ohlins Forks
Post by: k2000x on May 05, 2009, 01:49:45 pm
i have a billet alloy lower triple clamp blood red with 24mm off set brand new bud racing if ya interested pm me $100
Title: Re: CR250 '99 Ohlins Forks
Post by: 090 on May 05, 2009, 06:11:46 pm
Hi mate. If you had upper and lower i would be more interested.
Title: Re: CR250 '99 Ohlins Forks
Post by: k2000x on May 08, 2009, 04:35:58 pm
090 are you the guy with the dg race shirts if so might be able 2 cut a deal with you. swap for a couple of xxl jerseys.....did you have stuff on ebay as well long time ago got some kawasaki stuff it was great
Title: Re: CR250 '99 Ohlins Forks
Post by: 090 on May 08, 2009, 05:32:37 pm
Quote from: k2000x on May 08, 2009, 04:35:58 pm
090 are you the guy with the dg race shirts if so might be able 2 cut a deal with you. swap for a couple of xxl jerseys.....did you have stuff on ebay as well long time ago got some kawasaki stuff it was great
Guilty as charged! What do you have in mind?
PM me.
Cheers, Brad.
Title: Re: CR250 '99 Ohlins Forks
Post by: k2000x on May 09, 2009, 10:22:26 pm
well i will give you the lower clamp for a xxl kawasaki and honda jersey
Title: Re: CR250 '99 Ohlins Forks
Post by: 090 on May 09, 2009, 11:29:52 pm
I am after a set, not just a bottom so i dont think i can use it.