OzVMX Forum

Marque Remarks => Suzuki => Topic started by: Tim754 on April 20, 2009, 10:15:04 pm

Title: TS RM top swap
Post by: Tim754 on April 20, 2009, 10:15:04 pm

Hey Doc or any other fine person that knows, can I put a my RM 125S top end on one of my early TS125 bottoms. The cases colour excluded ,look almost? well identical *. Cheers Tim
* except for the bloody great hole punched in the butt of the RMs....

Title: Re: TS RM top swap
Post by: pokey on April 20, 2009, 11:19:40 pm

Suck It and see Tim , I doubt it mate as the RM was a follow on from the RA works machines  rather than the TM /TS and its bretherin

Title: Re: TS RM top swap
Post by: cyclegod on April 20, 2009, 11:39:03 pm

The RM125S top end will only fit on the TS125A 1976 model ONLY as it has square transfer ducts but all the earlier models have angled forward transfer ducts

http://cgi.ebay.com/ebaymotors/Suzuki-RM100-RM125-TM100-TS125-Base-Gask-NOS-s15_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ10066QQihZ017QQitemZ270331082593QQrdZ1QQsspagenameZWD1V

http://cgi.ebay.com/ebaymotors/SUZUKI-TM125-TM100-cylinder-base-gasket_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ35595QQihZ011QQitemZ320210521969QQrdZ1QQsspagenameZWD1V

Title: Re: TS RM top swap
Post by: DR on April 21, 2009, 06:53:51 am

yup, CG is on the money Tim, the '76 and '77 TS125 or TC125 are the only models the RM125S top end will fit.

that's what I have in this little baby  ;D

(http://abhzmq.bay.livefilestore.com/y1pB-qnc4soun26_o8pGSh9Fjvcm3GI8qACNdfjAfaPtOQETl1d7rWePUuUbnfUMLJ1o1rDtcGIECqnDyBs1QqlD5iOEn3wdc-U/sat%20june%2021th%2008%20004.jpg)

Title: Re: TS RM top swap
Post by: Tim754 on April 21, 2009, 02:31:31 pm

Bugger mine is a 74, but it does have that exact carby you seek Doc.... Thanks for the info boys, Cheers