OzVMX Forum
Clubroom => Tech Talk => Topic started by: oldyzman on April 18, 2009, 02:48:12 pm
-
Gday guys,
Was wondering if someone can shead some light. I have some std specs for this bike:
Main 400
cutaway 3.0
pilot 50
needle 6F16
Air ???????????????
Needle jet Q0
the air jet is not listed, I have the spec for a yz250H which is 2.5 should i use this or does it run without one as i cannot see it on the drawing either for the F . And to throw a spanner in the works its running a 1.5mm oversize E Barrell...
Any help will be much appreciated. All opinions will be respected
Cheers
Brett