OzVMX Forum

Marque Remarks => Husqvarna => Topic started by: subarumy98 on April 05, 2009, 07:50:33 am

Title: Electronic Ignition - PVL or MZB - Husky 500XC
Post by: subarumy98 on April 05, 2009, 07:50:33 am

HI

All fingers point to the ignition that can't keep up - so what is the suggestion; PVL or MZB.

Any words of wisdom or guidance from those in the know...


T

Title: Re: Electronic Ignition - PVL or MZB - Husky 500XC
Post by: albrid-3 on April 05, 2009, 08:49:22 am

l am also thinking about buying a PVL Ignition, my friend runs PVL on this BSA B50, Works Great. My choice for you PVL.
CHEERS

Title: Re: Electronic Ignition - PVL or MZB - Husky 500XC
Post by: JohnnyO on April 05, 2009, 09:04:18 am

I can recommend the PVL. I have one on a 490 maico and it's been faultless. I know nothing about a MZB.

Title: Re: Electronic Ignition - PVL or MZB - Husky 500XC
Post by: PEZBerq on April 06, 2009, 08:34:36 pm

New ignitions are expensive. :o :o :o  I would ask Steve at Betta Bikes in SA to take a look at it first.  I had my 430 XC Motoplat Mini 6 ignition stator repaired for about $250 all up if I recall.  Got mine sorted great :) :) :) Helps if the wires out the back of the stator are in good shape - insulation good and not frayed and hanging on by a few strands!  If wires dodgey it is a gamble - you can repair the stator but have the wires snap off  >:( >:(

Otherwise PVL seems the go except if you want lights then the MZB is the go.

Title: Re: Electronic Ignition - PVL or MZB - Husky 500XC
Post by: LWC82PE on April 06, 2009, 08:55:42 pm

i have used MZB on other bikes. good quality, well built, easy to install, reliable and good value

Title: Re: Electronic Ignition - PVL or MZB - Husky 500XC
Post by: subarumy98 on April 20, 2009, 01:19:38 am

Hold thumbs...


MZB on its way - will advise.