OzVMX Forum

Marque Remarks => Suzuki => Topic started by: Johns on March 29, 2009, 03:29:14 pm

Title: 1988DR600 Dakar
Post by: Johns on March 29, 2009, 03:29:14 pm

Hi from Johns:-

Can any of you Suzuki gurus out there post a parts catalogue picture of the carburretor of a 1988 Suzuki DR600 Dakar? I want to have a look at the air mixture screw in particular.

Cheers Johns.

Title: Re: 1988DR600 Dakar
Post by: LWC82PE on March 29, 2009, 03:44:15 pm

DR600 88 SJ

(http://fhq7hw.blu.livefilestore.com/y1p41Ch0SlD0CDqv-SxJoPJ3Wm8QuxTyHPg2ZluxqhKFJGtqeKvZJPi-SaKV9DSKEan_1xZyJwE3egi-jO2Ahzmsw/DR600SJ88.jpg)

DR600SH/SJ/SK E18

(http://fhq7hw.blu.livefilestore.com/y1pZnHTQSDjBTig4G_XR-kv3Xo5EBZu8m2U9Fc2kGSY_mHZGofFgbSVgpwIIZBDWf72sDjfUyYpY6fSsScmlZg4nA/dr%2088.jpg)

this one is E24 (Australian) model and is probably what you want

(http://fhq7hw.blu.livefilestore.com/y1pHoffr0ODAbKRyFh9MLWT8ZCpIBncSxL_u1gV7ksXHEckK4kpRdHZKSsI7Tj4WMWvna_u3AlPNZ5UGs7dr6O_Hw/drrj.jpg)

DR600 88 RJ

(http://fhq7hw.blu.livefilestore.com/y1pKwI1LwZ4mWmDJakysgRw3absxNeNnp6untUMU1J_-HU_3wW8MvsFci2S96IDYY7pTsjhtv3NcYUwIwtx20zvnw/88RJ%202.jpg)

Title: Re: 1988DR600 Dakar
Post by: Johns on March 30, 2009, 09:32:11 am

Hi from Johns:-

Thank you LWC3077 for the pic of the DR600 carby. It`s the E24 carby that`s fitted to the bike, and the part i am looking for is part number 39.Can you tell me if it is the spring that retains the mixture screw, also can you give me the part number if possible.

Thanks - Johns.

Title: Re: 1988DR600 Dakar
Post by: LWC82PE on March 30, 2009, 05:23:29 pm

38- mixture screw -13269-37410 superceeds to 13269-37400
39- spring - 13268-47070
40- washer - 13291-29900
41- o-ring - 13295-29900 

pretty standard set up. the spring just provides tension on the screw so it doesnt vibrate out and so the adjustment of the screw stays where it is set to. The mixture screw screws into the body of the carby.

Title: Re: 1988DR600 Dakar
Post by: HL400 on March 30, 2009, 06:00:02 pm

Hi Johns, I have some new old stock that will fit your DR600 still in the bags with the numbers.

1 gear lever, 25600-14A03
1 rear chain guide 61341-14A03
1 swingarm chain buffer.61273-14A00

If you want them they are going cheep

HL

Title: Re: 1988DR600 Dakar
Post by: Johns on March 31, 2009, 10:08:13 am

Hi from Johns:-

Thank you LWC3077 for the part numbers for the DR600, you have been most helpful.

Thanks HL400 for letting me know what parts you have available, but i am right for those at the moment.

Cheers from Johns.