OzVMX Forum

Clubroom => Tech Talk => Topic started by: lc4 on March 17, 2009, 05:17:52 pm

Title: Aluminium welding
Post by: lc4 on March 17, 2009, 05:17:52 pm

Can anyone recommend a good Aluminium (engine cases) welder in Sydney area.
Thanks

Title: Re: Aluminium welding
Post by: oz555ktm on March 17, 2009, 09:22:33 pm

Ring Husky Parts .

I have just sent him a set of Engine Case (KTM) to weld ...

Title: Re: Aluminium welding
Post by: Lozza on March 17, 2009, 11:05:34 pm

There are more options than welding, some pics would be handy

Title: Re: Aluminium welding
Post by: lc4 on March 18, 2009, 05:44:50 pm

Quote from: Lozza on March 17, 2009, 11:05:34 pm

There are more options than welding, some pics would be handy

Nothing major its a XL250 case where the chain at one time has derailed (as they all do) and knocked a hole into where the clutch actuator arm is. The problem is that moisture and dirt get in a sieze everything up , silicon would suffice but I want it right.
Note this is on the main case not the RH cover as I know its made from magnesium.