OzVMX Forum

Marque Remarks => Yamaha => Topic started by: Tim754 on February 27, 2009, 10:49:11 pm

Title: It250 head/barrel tension.
Post by: Tim754 on February 27, 2009, 10:49:11 pm

 Could someone give me a realistic measurement for head bolt tension on an IT250 1984 mode (29V) l. thanks Tim.

Title: Re: It250 head/barrel tension.
Post by: Stewart Allen on February 28, 2009, 07:49:30 am

Hi Tim,
         Yamaha Manual says 22nm or 16FtLb, this is for 83 which I beleive is the same.

Title: Re: It250 head/barrel tension.
Post by: Tim754 on February 28, 2009, 09:51:10 am

Thanks Oldstuff  ;) Cheers