OzVMX Forum

Marketplace => For Sale => Topic started by: mx250 on February 20, 2009, 11:20:37 am

Title: Yamaha '76 125X Forks.
Post by: mx250 on February 20, 2009, 11:20:37 am

Yamaha '76 125X Forks. 36mm dia.

Excellent condition. 1 x Gaiter look good and complete, other has piece missing in the clamp area (shouldn't effect function) includes correct clamps. One spec of rust between the triples, outside of the work area of forks (could be turned to the inside and never be seen ;)).

Currently have Suzuki caps. Might find the 'speedo tacho' gas canisters if you really need them. Axle clamp missing.

Sliders excellent - no rock gouges or gravel rash marks. Lacquer sun affected, cracked and flaking etc. Stickers still there but sun faded.

More available detailed photos if required, ask.

$125 ono. Postage at cost (I've sent forks to N.S.W. for about $10 and to Vic for about $15 ;)).

(http://i323.photobucket.com/albums/nn458/mx250syd/P2200043.jpg)

Title: Re: Yamaha '76 125X Forks.
Post by: JC on February 24, 2009, 02:37:14 pm

G,

If you still have them can you measure overall length from top of stanchion tube to centreline of axle pls?

Title: Re: Yamaha '76 125X Forks.
Post by: mx250 on February 24, 2009, 07:40:01 pm

Quote from: JC on February 24, 2009, 02:37:14 pm

G,

If you still have them can you measure overall length from top of stanchion tube to centreline of axle pls?

Yep, still have them - Length is 815mm with the caps giving an additional 30mm.

Title: Re: Yamaha '76 125X Forks.
Post by: mx250 on February 25, 2009, 03:59:53 pm

Going once, going twice........ ;D

Ya can't say I didn't offer. Any O.N.O.'s  8).

Or, it will be appearing on an Ebay near you shortly ;)

Title: Re: Yamaha '76 125X Forks.
Post by: mx250 on March 03, 2009, 02:00:06 pm

;D$125 ono. Postage at cost (I've sent forks to N.S.W. for about $10 and to Vic for about $15). ;D

I found the 'speedo/tacho' gas canisters and I'll offer them here for a few days before EvilPay ;D.

Missing one Schroeder valve.

(http://i323.photobucket.com/albums/nn458/mx250syd/P3030052.jpg)

(http://i323.photobucket.com/albums/nn458/mx250syd/P3030051.jpg)

Title: Re: Yamaha '76 125X Forks.
Post by: mx250 on March 03, 2009, 10:10:43 pm

I'll swap for Monty parts, especially Cappra/Enduro wheels. V75 airbox, Seat. Cota 248 bits.

Title: Re: Yamaha '76 125X Forks.
Post by: LWC82PE on March 03, 2009, 10:23:46 pm

will you be keeping the 78 RM caps you had fitted first up?

Title: Re: Yamaha '76 125X Forks.
Post by: mx250 on March 04, 2009, 04:13:28 pm

The cap are still available. Probably sell separately.