OzVMX Forum

Marque Remarks => CZ => Topic started by: Ji Gantor on February 17, 2009, 08:48:20 am

Title: Removing CZ Head Bearing Cups
Post by: Ji Gantor on February 17, 2009, 08:48:20 am

To remove the CZ head bearing cups use a Toledo part No 246300 Split Collet Puller slide hammer with a 30mm collet.

Ji

Title: Re: Removing CZ Head Bearing Cups
Post by: Ji Gantor on February 18, 2009, 12:04:14 pm

The head bearings are the old type with 16 (I think) loose S/S balls. So when you pull the steering apart the balls go everywhere.

This can now be changed to a tapered needle roller bearing system. These bearings are the same size as the original CZ bearings.

Ji