OzVMX Forum

Marque Remarks => Husqvarna => Topic started by: husky61 on February 04, 2009, 08:11:57 am

Title: 250 Mag
Post by: husky61 on February 04, 2009, 08:11:57 am

This is our 250 mag.

Almost finished.

It received all the same mod's that the 450 .

Assistance supplied by same mates

Shoey

Title: Re: 250 Mag
Post by: Heikki360 on February 04, 2009, 08:14:22 am

Looking good - who made the pipe? Most seem to require the 75 radial head for clearance.

Title: Re: 250 Mag
Post by: Snowy 76 on February 04, 2009, 08:23:25 am

G`day Shoey, Husky`s looking good!, hav`nt still got the original mag swing arm have you?

Title: Re: 250 Mag
Post by: mx250 on February 04, 2009, 08:28:51 am

A great resto of a great looking bike. Love that husky tank, especially in red ;) :).

Title: Re: 250 Mag
Post by: husky61 on February 04, 2009, 09:05:02 am

Hey Mark

Original Mag swing arm has been used on another project.

I beleive the pipe on the bike is no longer available , check with vintage iron as i beleive they did have similiar mag pipe that fits straight up with no mod's.required.

Shoey

Title: Re: 250 Mag
Post by: bigk on February 04, 2009, 10:03:29 am

Hello Shoey,
Nice bike, I am giving mine the once over npow for the coming season, but have decided to keep it fairly original.
Is the original mag 250 pipe still around? If so, would you consider selling it? I have a spot where it could go.
Cheers,
K

Title: Re: 250 Mag
Post by: husky61 on February 04, 2009, 12:20:20 pm

Hey Mich.

Pipe has been modified and used another project.

Rob

Title: Re: 250 Mag
Post by: bigk on February 04, 2009, 03:13:25 pm

Thanks, I'm actaully looking for a pipe to suit a '73 CR250 if you here of one anywhere.
Cheers,
K

Title: Re: 250 Mag
Post by: Heikki360 on February 04, 2009, 03:55:21 pm

I believe that the Mag's pipe is unique to the Mag, which is why original ones are both hard to find and expensive. It could probably be modified for the 73 but that might be a bit of a waste. Others may know more though.

Title: Re: 250 Mag
Post by: albrid-3 on February 04, 2009, 09:53:43 pm

THE PIPE ON THE MAG LOOKS LIKE A COPY OF THE 78 MODEL 250CR. YOU MAY BEABLE TO COPY OFF THAT MODEL.
CHEERS
dAV

Title: Re: 250 Mag
Post by: JC on February 05, 2009, 01:15:40 pm

Shoey,

Are the forks modified internally at all?

Title: Re: 250 Mag
Post by: husky61 on February 05, 2009, 02:04:19 pm

JC

Slight mod'd to damper rods , generally standard fork set up with 20w oil.

Offset triple clamps.

shoey

Title: Re: 250 Mag
Post by: JC on February 05, 2009, 02:25:28 pm

Bike looks gorgeous.

Have you ridden it since done frame mod? If so, does it steer any better than std Husky?

Title: Re: 250 Mag
Post by: husky61 on February 05, 2009, 03:06:07 pm

I have not ridden mine , but have ridden others with the mods , thats why i did mine. With total mod. package they ride and steer much better than standard and standard is very good.

Shoey

Title: Re: 250 Mag
Post by: holeshot buddy on February 05, 2009, 05:27:01 pm

thats what i thought standard is
very good so they must be fantastic
we are gunna smoke all these hondas and cee zees and maygos
cant wait ;D ;D ;)