OzVMX Forum

Marque Remarks => Suzuki => Topic started by: rocketfrog on January 31, 2009, 07:36:54 pm

Title: PE 250 Z no spark
Post by: rocketfrog on January 31, 2009, 07:36:54 pm

PE GURUS, I have started to troubleshoot a no spark issue, so far I have changed plug and coil with known serviceable components, disconnected kill switch to eliminate stray earth and am down to either the magneto or the CDI Unit. Does any-one have specifications for the winding resistance and a method to test the CDI?  I am not familiar with the PE range and  have not any publications on the type. From experience it usually does no good to grab a spare CDI from the wrecker unless you can verify the condition of the item first, but if any-one specialises in post 80 PE's and can spare a CDI for troubleshooting I would appreciate a loan if the magneto tests OK.

Title: Re: PE 250 Z no spark
Post by: LWC82PE on January 31, 2009, 07:42:36 pm

do you have a 82 250 Z aswell? they are comming out of the wood work. that could be 3 now.

all info can be found here

http://groups.yahoo.com/group/PEmotorcycles/

and

http://pureenduro.free.fr/


this is the 82 manual here

 http://pureenduro.free.fr/Div/documentation/PE%20250/manuel%20suzuki%20pe%20250%20Z.pdf

i am looking at a copy in my hand right now and there is CDI specs and stator tests



there are manuals there with CDI and stator tests