OzVMX Forum

Marketplace => Wanted => Topic started by: Snowy 76 on January 28, 2009, 02:05:05 pm

Title: Supertrapp discs and end cap
Post by: Snowy 76 on January 28, 2009, 02:05:05 pm

Can anybody help me out with some discs and end cap for old style Supertrapp muffler on a 77 model tt500, lost them last race meet and need to get bike ready for Jack Hogg. Thanks Mark. Want to replace with down pipe eventually, where do I get complete exhaust for Dirt Track. Thanks Again.
[img(http://i160.photobucket.com/albums/t182/mbmech/tt500cr480002.jpg)][/img]

Title: Re: Supertrapp discs and end cap
Post by: Tony T on January 28, 2009, 02:55:22 pm

What's wrong with it the way it is?  :D :D :D

Sorry..................

Title: Re: Supertrapp discs and end cap
Post by: MX? on January 28, 2009, 07:14:13 pm

Yeah, I reckon it would sound real nice as it is.  :D
Try ShowandGo in South Aussie ....they have a web site. I know they sell what looks like the old style Supertrapp mufflers and I think the discs etc as well

Title: Re: Supertrapp discs and end cap
Post by: mboddy on January 29, 2009, 06:57:56 am

Probably best to buy the 4 Stroke Core Kit rather than individual parts.
http://parts.motorcycle-superstore.com/1/1/2597-four-stroke-core-kit-supertrapp.html (http://parts.motorcycle-superstore.com/1/1/2597-four-stroke-core-kit-supertrapp.html)
If you only need disks and the end cap then you can buy just paks of disks either 6 or 12 at a time.

I make my own end caps using about $10 worth of stuff from a Stationary Store or Newsagent.
A chrome 'ding' bell for a counter is the right diameter.
Find a paper spike that is an interference fit over the bell and cut out the center.
The rounded chrome end cap looks really trick!

Title: Re: Supertrapp discs and end cap
Post by: Tony T on January 29, 2009, 01:53:26 pm

I just emailed Show & Go re some SP parts and the parts I need to set the Mikuni carb up. And got a very short reply just saying "nothing for SP370, it's too old"
And when I asked about Mikuni carb parts, they just said "don't know the jetting specs"
Bit of a worry when they're supposed to be Mikuni specialists.  :D
Better try Ian Williams Tuning like LWC suggested, I think.

edit: Ian Williams got straight back to me and is only too happy to help if he can.  ;D

Sorry........... back to the Super Trapp discussion.

Title: Re: Supertrapp discs and end cap
Post by: Noel on January 29, 2009, 02:29:41 pm

Hi Mark,
If you get stuck you are welcome to borrow this one of my xt,
(http://i77.photobucket.com/albums/j41/Tento850/DSCF5475.jpg)
and if i'm not riding you could borrow my down pipe
(http://i77.photobucket.com/albums/j41/Tento850/DSCF3172.jpg)
cheers
Noel

Title: Re: Supertrapp discs and end cap
Post by: Snowy 76 on February 04, 2009, 08:35:35 am

Thanks for the Info and offers of help, but I`ve bit the bullet and ordered a flash down pipe set up from the States, hopefully it gets here in time.