OzVMX Forum

Marque Remarks => Yamaha => Topic started by: Tim754 on January 27, 2009, 04:15:17 pm

Title: IT175/200
Post by: Tim754 on January 27, 2009, 04:15:17 pm

Does an It175 (J) except an IT200 (k) barrel?  If not does anyone have an IT175 that is not on 2mm over and scored/ Please. cheers Tim

Title: Re: IT175/200
Post by: cyclegod on January 27, 2009, 04:33:23 pm

listed incorrectly but definately a "J" barrel

http://cgi.ebay.com/ebaymotors/1979-YAMAHA-IT175-IT-175-CYLINDER_W0QQcmdZViewItemQQcategoryZ34284QQihZ002QQitemZ120289639529QQrdZ1QQsspagenameZWDVW

Title: Re: IT175/200
Post by: evo550 on January 27, 2009, 05:08:30 pm

Tim,
I don't think so, although they share the same stroke just a bigger p[iston, I have a funny feeling that the larger cylinder would need a larger opening in the crank cases, check to see if they share the same crank case part number ?
I think a complete motor would bolt straight in though.

Title: Re: IT175/200
Post by: jimg1au on January 27, 2009, 05:15:22 pm

tim
looked on usa parts no and the 175 1982j and 1983k have the same bace gasket
1984 200L has a different no

Title: Re: IT175/200
Post by: Tim754 on January 27, 2009, 05:40:04 pm

Thanks all just as I thought, but other some people take a bit of convincing. Looking up the barrel now CG ;) Tim

Title: Re: IT175/200
Post by: LWC82PE on January 27, 2009, 05:48:41 pm

still have option to re-sleeve.

Title: Re: IT175/200
Post by: Tim754 on January 27, 2009, 05:56:31 pm

That is already being priced too Leith :D Cheers