OzVMX Forum

Marketplace => Wanted => Topic started by: MX? on January 14, 2009, 08:53:39 pm

Title: XL 350 K0/K1 Rear brake torque arm & chain guard
Post by: MX? on January 14, 2009, 08:53:39 pm

G'day all, I'm after a brake arm and the metal chain guide/guard for the above.
I've put a 350 swingarm on my 250 and now find these parts are different.....suprisingly enough  ::)
Guess I could easily make the brake arm but would prefer the real thing??

Title: Re: XL 350 K0/K1 Rear brake torque arm & chain guard
Post by: hampster on January 26, 2009, 07:11:19 am

Hi MX?

I sure i have got both items will have a look on Tuesday when i go back to work.

hampster.

Title: Re: XL 350 K0/K1 Rear brake torque arm & chain guard
Post by: MX? on January 26, 2009, 06:53:54 pm

OK, thanks.  :)

Title: Re: XL 350 K0/K1 Rear brake torque arm & chain guard
Post by: hampster on January 28, 2009, 09:23:15 pm

Quote from: MX? on January 26, 2009, 06:53:54 pm

OK, thanks.  :)

Had a look a no go. The chain guild is not the best design, on my 350 i used a xr 350 fully enclosed guild the chain can not derail.
As for the brake arm a flat bar can be used drill a heap of holes in it for the factory look. 

hampster.