OzVMX Forum

Marketplace => Wanted => Topic started by: vmxken on December 30, 2008, 10:09:08 am

Title: Spark plug blanking bolt
Post by: vmxken on December 30, 2008, 10:09:08 am

Hi - I need one of those special 'bolts' that blanked off a second spark plug hole in the head.  It is for a 1/2" reach plug hole.

Thanks

Ken

Title: Re: Spark plug blanking bolt
Post by: firko on December 30, 2008, 10:28:23 am

I may have one in an old DT1 head Ken. l'll have a lookie and get back to you.

Title: Re: Spark plug blanking bolt
Post by: frostype400 on December 30, 2008, 12:01:58 pm

is that like on the some of the suzuki ts's i dont have one but i thought that was for a second plug and acted like an emergency plug if your main one shot itself you could switch the lead and have a fresh plug although that can sometimes look a bit ugly thanks Michael. :)

Title: Re: Spark plug blanking bolt
Post by: LWC82PE on December 30, 2008, 12:28:37 pm

14mm bolt with plug washer/copper washer should do the job

Title: Re: Spark plug blanking bolt
Post by: Tim754 on December 30, 2008, 12:58:11 pm

Got a brass one with sealing washer some months back from the local plumbing and gas fitting supplies Ken for $3.

Title: Re: Spark plug blanking bolt
Post by: frostype400 on December 30, 2008, 03:13:18 pm

yeah you could get a brass 1/2 plug you could get a washer anyway and if you want it shorter just cut with a hacksaw is there a reece or tradelink near you probably 3$ for a brass plug they will help with something half inch thanks Michael. :)