OzVMX Forum

Marketplace => Wanted => Topic started by: DG 26 on December 27, 2008, 10:23:40 pm

Title: 490 clutch
Post by: DG 26 on December 27, 2008, 10:23:40 pm

Giday all  ;D
looking for a inner clutch hub for a IT490K :o ? 1 of the spring posts has departed to much power ? :D

Thanks

don

Title: Re: 490 clutch
Post by: lms6201 on December 28, 2008, 07:24:48 am

normally from holding a post to undo the hub nut ,  if u still have the post u may be able to screw it back on from the back with a csk 6mm bolt , run a tap right through the post , csk the back of the hub , if u are worried about balance , stick another screw in an opposite post , if the post is missing u can turn one up , use loktite on the retaining screw 

Title: Re: 490 clutch
Post by: DG 26 on December 29, 2008, 08:37:07 am

Thanks Ims6201
will give it a go  ;)