OzVMX Forum
Marque Remarks => Suzuki => Topic started by: LWC82PE on December 27, 2008, 08:00:15 pm
-
do any of these bikes have an alloy rear rim fitted as standard?
DS100C 1978
DS100N 1979
DS100T 1980
DS100X 1981
DS125C 1978
DS125N 1979
DS125T 1980
DS125X 1981
DS185C 1978
DS185N 1979
DS185T 1980
RL250L 1974
RL250M 1975
RM100A 1976
RM100B 1977
RM125A 1976
RM125B 1977
RM125-M 1975
TS100C 1978
TS100N 1979
TS100T 1980
TS100X 1981
TS125C 1978
TS125ERT 1980
TS125N 1979
TS125X 1984
TS185B 1977
TS185C 1978
TS185N 1979
TS185T 1980
TS185X 1981
-
Rm 125 a -b -m yes
-
No TS or DS came with an alloy rim as standard they were steel all the way
-
RL250 was alloy too
-
i thought ive seen some 77 or 78 TS's with alloy rims and maybe 78/79 USA model DS suzukis with alloy rim.
anyway im looking for a alloy rim from one of these models in 18 x 185 it doesnt have to be perfect, but as long as its not cracked and covered in alloy cancer. i dont mind if it needs annodizing
what width are the RM 125 rims?
-
1.85 "
-
ok good. i need one of those rims 75-77 RM 125 rear or maybe RL 250
-
On the subject of rims I'm after one too (second to LWC! :)).
Alloy, 1.85 X 18 to suit a 74 Suzuki TM 125. Non mud catcher type but has imprints like eye brows around the spoke sockets.
Cheers
Brent
PS Leith I hope to have access to a camera THIS weekend.
-
well i have a rear rim here 1.85x18 rm125a standard one im going to run excels as i can get the quite cheap but i can probably sacrifice this one to a worthy cause i dont thinks theres any cracks but ill take a look tomorow
-
thanks 'caps', i will do a deal with you with that fox RM CD i got ;D
you can mail photos to [email protected]
Cheers
-
no probs mate ive just gotta de lace the rim from my hub
-
can you also tell me if it is an Akront or takasago and if it has a lip around the outer edge?
-
its flat edge and looks like a did
-
ok sounds like it will be ok. i was preferring it wasnt like this.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ru=http%3A%2F%2Fshop.ebay.com%3A80%2F%3F_from%3DR40%26_trksid%3Dm38.l1313%26_nkw%3D330282807118%26_sacat%3DSee-All-Categories%26_fvi%3D1&item=330282807118&viewitem=
if its DID is should would have DID stamped on it
-
i meant did style its a takasago ill send you pics asap mate
-
ok takasago is also fine thanks
-
email sent
-
just out of interest, the TS185B/C from 1977/78 had alloy rims as standard in the 1.85 width, These rims run the small lip and are not the same as the earlier rims on the TM's but still lace up ok. The '76/'77 TS250 and TS400 also sported alloy rims and the RL250's uses TM125 wheels front and rear.
-
ahh yes i thought so, i thought what i could see in some sales brochures were alloy rims :)