OzVMX Forum

Marketplace => Wanted => Topic started by: jimson on December 03, 2008, 11:10:19 pm

Title: Honda XL 350 parts
Post by: jimson on December 03, 2008, 11:10:19 pm

G'day viewers I'm after some bits to fix a 350 XL 1974 KO model this project is on a tight budget  :-[  so if I can get it up an running and invest in new bits later on. anyways I'm after a base plate and points a seal for the cam shaft and  a copy of the engine specs  from a repair manual   I'm  only using the  engine  its going into a bitsa bike  ;D thanks jimson                                                                                     

Title: Re: Honda XL 350 parts
Post by: cyclegod on December 03, 2008, 11:24:21 pm

http://cgi.ebay.com/ebaymotors/74-75-76-HONDA-XL350-XL-350-250-175-125-TL-TL250-POINTS_W0QQcmdZViewItemQQcategoryZ35595QQihZ020QQitemZ300256630482QQrdZ1QQsspagenameZWDVW

and this too...

http://cgi.ebay.com/ebaymotors/Honda-TL250-XL175-XL250-XL350-XL-250-350-Cam-Seal-NOS_W0QQcmdZViewItemQQcategoryZ35595QQihZ020QQitemZ300273315592QQrdZ1QQsspagenameZWDVW

Title: Re: Honda XL 350 parts
Post by: BETRIC on December 04, 2008, 08:25:11 am

JIMSON I HAVE EMAILED YOU AN ATTACH OF THE SPECS FOR THE XL350 ENGINE ; ;)

Title: Re: Honda XL 350 parts
Post by: jimson on December 04, 2008, 06:37:54 pm

Thanks Betric for that  ;D  Cyclegod thanks but I don't shop on ebay out of OZ  ::) jimson

Title: Re: Honda XL 350 parts
Post by: jimson on January 21, 2009, 09:14:38 pm

G'day viewers I'm after a cam seal and a rear cam chain guide for this XL350 project any one want to sell said items.jimson

Title: Re: Honda XL 350 parts
Post by: Tony T on January 21, 2009, 09:28:05 pm

I bought all my engine seals from the local bearing/seal guy.
Cost about 3 bucks.  ;D

Title: Re: Honda XL 350 parts
Post by: jimson on January 21, 2009, 09:37:27 pm

I went to auto pro and they said that it was a odd size and thats how the bike companies make you buy through them.jimson

Title: Re: Honda XL 350 parts
Post by: Tony T on January 21, 2009, 10:41:21 pm

I definitely gave them the sizes and bought all seals from my local supplier last year.
I think some might be a slightly different width, which shouldn't matter.
I've used ones on my SP engines in the past without any problems.

Title: Re: Honda XL 350 parts
Post by: LWC82PE on January 21, 2009, 10:43:13 pm

you gotta go to a specialist bearing/seal supplier like CBC or your local farm/agricultral/tractor place

Title: Re: Honda XL 350 parts
Post by: Tim754 on January 21, 2009, 11:05:18 pm

Always bought our XL250/350 seals at local bearing suppliers. {Bendigo bearings and Centre State bearings in Vic} Yep cost SFA too. ;) Cheers Tim