OzVMX Forum
Marque Remarks => Suzuki => Topic started by: LWC82PE on November 21, 2008, 08:33:26 pm
-
has any one got a DR 250 or 500 parts book from around 81-85 for australian models? im just looking for some information and just a scan or photo of a couple pages is all that i need
-
Sorry mate can't help, as I have copied Alpha Sports # I have a Dr 500 manual if that is of any help ?
-
no i need parts book with E24 parts. its the headlight section of interest to me. alpha sports only list US lens which is for left side of the road vehicles.
any one have a photo of what the headlight on one of these looks like? its the round one
-
why not go down to your local bezuki dealer and check his book or micro fish out,failing that pm me and ill go down where i worked years ago and post a copy to you as im too computer dumb to send a scan
TT5 Matt
-
sometimes i think its a bit rude to ring the dealer for parts numbers but not order anything straight up so i prefer not to do that. im just researching at the moment. i found a site in netherlands that might have the diagram i want..... yes just found online parts book for E24 model!
-
Try the following link......all the suzuki part no. info you could ask for!
http://www.alpha-sports.com/suzuki_parts.htm
-
no thats no help. US DR models are the enduro models and not the 'S' trail models
-
Ok this is what im looking for. Im not sure im not sure if the light with the black rim made it onto the production modles? All the bike tests ive seen on DR 250 S show a chrome rim. I thought it might be the same as the US SP 250 but the part numbers appear different for all bits. The Australian light has a lens unit in the one ring bit the US light has a sealed beam unit mounted in one ring which is then mounted in the outer rim.
I don’t need the plastic shield, just the complete light. I reckon I can find all the parts as NOS items how ever I don’t want to just yet as the parts may be wrong. I learnt the hard way when I bought a NOS PE 250 B headlight shell and a NOS rim but it was too small to accept a standard universal 5 & 3/4 inch OD lens unit which is what I want. So before I go out and buy these DR light parts I want to be sure that I can fit a aftermarket universal 5 & 3/4 inch OD lens unit.
ideally i would like that one with the black rim but that picture is of a pre production bike and im not sure they did end up having the black rim.
So has any one of these DR 250 S headlights? It may be the same as DR 125 aswell?
Can anyone take any measurements?
Can any one lend me a rim off one of these lights? I would just need to quickly borrow it to see if the lens I want will fit and then I can return it ASAP at my expense.
A search on ebay didn’t show up anything
Thanks for any help
(http://img.villagephotos.com/p/2006-6/1192012/dr1.jpg)
(http://img.villagephotos.com/p/2006-6/1192012/dr2.jpg)