OzVMX Forum

Marketplace => Wanted => Topic started by: Doc on November 05, 2008, 11:09:09 am

Title: Oil Slinger plate for TM/TS250 Suzuki
Post by: Doc on November 05, 2008, 11:09:09 am

On the hunt for a TS or TM250 '72-'81 oil slinger plate or oil guide plate OD 71mm ID 30.5mm

I assumed I had spares but I've assumed wrong...again  ::) actually I'll be needing 2 but 1 gets me out of trouble :) Warrens got one one ebay for about $25 delivered but I was hoping for something a little cheaper :-\

still hunting that TS185ER oil reservoir too  ;)

Title: Re: Oil Slinger plate for TM/TS250 Suzuki
Post by: Doc on November 05, 2008, 11:29:04 am

Found one so the pressure is off! ;D my memory isn't failing but my eyesight maybe ::)

wet day in Brisneyland so I've a little 3D puzzle to put together..

(http://i12.photobucket.com/albums/a205/Doctor_Suzuki/3dpuzzle.jpg)

and this ones for the next rainy day :)

(http://i12.photobucket.com/albums/a205/Doctor_Suzuki/3dpuzzle2.jpg)

not to mention a certain KTM125 to be done in between  ::)

(http://i12.photobucket.com/albums/a205/Doctor_Suzuki/after001.jpg)

how I love a rainy day....

Title: Re: Oil Slinger plate for TM/TS250 Suzuki
Post by: Tim754 on November 05, 2008, 02:46:42 pm

Whats a rainy day????

Title: Re: Oil Slinger plate for TM/TS250 Suzuki
Post by: Doc on November 05, 2008, 03:29:43 pm

Tim a rainy day is normally when I'd spend all my savings but since I don't have any to spend I'll spend someone elses ;D 'tis oldfarts TM250 motor I'm playing with at present :D

Done
(http://i12.photobucket.com/albums/a205/Doctor_Suzuki/done.jpg)

Done
(http://i12.photobucket.com/albums/a205/Doctor_Suzuki/2sm.jpg)
well, the motor is done at least :)