OzVMX Forum

Marketplace => Wanted => Topic started by: John Orchard on November 20, 2022, 04:26:02 pm

Title: WANTED, Chasing a rear sprocket for early RM/TM/TS125, 428 over 55t
Post by: John Orchard on November 20, 2022, 04:26:02 pm: Can anyone help me with a Suzuki rear sprocket, the style with the 64mm ID to suit 428 chain size, anything larger that 55 teeth, steel or alloy, new or good used, thanks.
Title: Re: WANTED, Chasing a rear sprocket for early RM/TM/TS125, 428 over 55t
Post by: pokey on November 21, 2022, 08:32:03 pm: Same as early RM125. Free postage $49.95 for a 55 JT do make a 60 but availability hmmm. you may be better off cutting the centre out of 2 sprockets and welding
https://www.ebay.com.au/itm/284529715147?chn=ps&_ul=AU&norover=1&mkevt=1&mkrid=705-139619-5960-0&mkcid=2&mkscid=101&itemid=284529715147&targetid=1741701787658&device=c&mktype=pla&googleloc=9069077&poi=&campaignid=18278742238&mkgroupid=141565058112&rlsatarget=pla-1741701787658&abcId=9301725&merchantid=137596996&gclid=EAIaIQobChMIpbPxhvm--wIVjgkrCh0gOQskEAQYAiABEgJ20vD_BwE
Title: Re: WANTED, Chasing a rear sprocket for early RM/TM/TS125, 428 over 55t
Post by: sleepy on November 23, 2022, 05:13:06 pm: There is a chance I could have one in the archive somewhere. I'll try and have a look next time I go into my other shed.
Title: Re: WANTED, Chasing a rear sprocket for early RM/TM/TS125, 428 over 55t
Post by: John Orchard on November 23, 2022, 05:34:48 pm: Quote from: sleepy on November 23, 2022, 05:13:06 pm
There is a chance I could have one in the archive somewhere. I'll try and have a look next time I go into my other shed.

Thanks :-) I guess many have switched to 520.
Title: Re: WANTED, Chasing a rear sprocket for early RM/TM/TS125, 428 over 55t
Post by: sleepy on November 26, 2022, 10:44:56 am: Quote from: John Orchard on November 23, 2022, 05:34:48 pm
Quote from: sleepy on November 23, 2022, 05:13:06 pm
There is a chance I could have one in the archive somewhere. I'll try and have a look next time I go into my other shed.

Thanks :-) I guess many have switched to 520.
With 520 it is almost impossible to get the gearing required and to find a front 520 that will fit. You would need to go done to 11 or 12 on the front.
I've got a very worn one. I could machine the center of a blank to suit if you can find one. Steel blanks would probably be available from BSC part # 08A60 for 60 tooth.
Title: Re: WANTED, Chasing a rear sprocket for early RM/TM/TS125, 428 over 55t
Post by: John Orchard on November 27, 2022, 11:26:59 am: Thanks Guy's :-) I ended up ordering a new alloy sprocket in 60 teeth from DC Plastics, coming with a 46t alloy for my DT1 also :-)