OzVMX Forum

Marketplace => Wanted => Topic started by: John Orchard on October 29, 2022, 10:03:27 am

Title: WANTED, STD piston to suit RM125M or TM125.
Post by: John Orchard on October 29, 2022, 10:03:27 am

Would anyone have a new, or very little use, standard bore (56mm) piston for sale to suit an RM125M or TM125, I have looked at the TS125 pistons but once I shorten the inlet skirt, most of the strengthening rib along the bottom of the skirt is cut away, I want to reduce the chance of cracks appearing.

Needing a piston WITHOUT the exhaust bridge lubricating holes.

Maybe aftermarket (forged?) piston might be different, if are they better in that area I will try one, thanks.

Regards, John.

Title: Re: WANTED, STD piston to suit RM125M or TM125.
Post by: sleepy on October 31, 2022, 06:38:14 pm

Wossner do a TS125 piston which would be more robust than the original and probably by the time you buy new rings clips and pin for a Suzuki piston you will be well on the way to the price of Wossner.

Title: Re: WANTED, STD piston to suit RM125M or TM125.
Post by: John Orchard on October 31, 2022, 08:26:42 pm

Good idea, thanks.