OzVMX Forum
Marque Remarks => Honda => Topic started by: Paul Harris on April 12, 2022, 11:00:52 am
-
Not sure if this bike has standard fork caps - they don't appear to screw in and have right-angled air valves. Left side looks like it's leaking.
-
Many different forks caps fit different forks, If you have a thread measure device ( most are 1mm per cem ) and then measure outside dia, so for example most 35mm forks caps will screw into another set.
-
Does the cap have a hex head, DG caps maybe?
-
No John, They're circular - sit below the top of the fork and don't screw in - they spin freely but are definitely fixed.
-
Is it possible that there are 77 125 forks that have a ring clip that is held in place with a plate on top usually with a m6 bolt but maybe with the air cap. a photo would help. does it have leading axle ??
12,13,14, 26 in this schematic
https://images.cmsnl.com/img/partslists/honda-cr125m3-elsinore-1977-usa-front-fork-77-78_bighu0054f020401_5d1c.gif
Actually the 76 250 has a similar set up
https://www.cmsnl.com/honda-cr250m-elsinore-1976-usa_model594/seat-setspring_51460381305/
-
Thanks Noel - not leading axle. I've got photos but can't see how to post them on here?
-
https://images.cmsnl.com/img/partslists/honda-cr250m-elsinore-1976-usa-front-fork-m1-76_bighu0039f110401_4a19.gif
https://www.cmsnl.com/honda-cr250m-elsinore-1976-usa_model594/seatspring-upper_51454381003/
-
Thanks Noel, I'll attempt to get them apart. They're obviously aftermarket or modified.