OzVMX Forum

Clubroom => Tech Talk => Topic started by: Honda Hoarder on November 25, 2018, 10:01:54 pm

Title: Crank Rebuilders
Post by: Honda Hoarder on November 25, 2018, 10:01:54 pm

Hello people

Looking to get some CR cranks rebuilt the ones with the tin covers on them.

Can anyone please recommend a place ?

Thanks and have a great Christmas.

Title: Re: Crank Rebuilders
Post by: Hoony on November 26, 2018, 04:32:01 pm

where are you located. i know of 3 in Melbourne.

Title: Re: Crank Rebuilders
Post by: Honda Hoarder on November 26, 2018, 07:40:09 pm

Thanks for the reply Hoony

Western Queensland

Title: Re: Crank Rebuilders
Post by: Hoony on November 26, 2018, 09:40:07 pm

Quote from: Honda Hoarder on November 26, 2018, 07:40:09 pm

Thanks for the reply Hoony

Western Queensland

Make sure you use someone who has done this before with correct tooling, i learnt this lesson the hard way and my 85' CR500
tins let loose blowing a big chuck out of crankcases. crank, head, cylinder and cases all replaced big damage as it was under load and revving hard when it let loose.

Title: Re: Crank Rebuilders
Post by: Curtis on November 27, 2018, 10:03:14 am

out of interest who do you use in Melbourne?

Quote from: Hoony on November 26, 2018, 04:32:01 pm

where are you located. i know of 3 in Melbourne.

Title: Re: Crank Rebuilders
Post by: KTM47 on November 27, 2018, 05:13:46 pm

Serco at Woolongabba have been doing cranks for years.