OzVMX Forum

Marketplace => Wanted => Topic started by: dodgee on August 08, 2018, 12:07:23 pm

Title: 1974 cr125honda
Post by: dodgee on August 08, 2018, 12:07:23 pm

chasing a rod kit to suit

Title: Re: 1974 cr125honda
Post by: Noel on August 08, 2018, 07:52:52 pm

I think you will have to use a later model Honda 125 ( Possibly 81?)
 and have a stepped pin made

Title: Re: 1974 cr125honda
Post by: Momus on August 08, 2018, 11:32:19 pm

This is the P/N 81/84 CR125 rod that is used as a replacement.

The crankpin is 22 mm versus the 20 mm of the original so some machining is necessary


13200 KA3 740

Title: Re: 1974 cr125honda
Post by: Bamford#69 on August 09, 2018, 09:15:19 am

Hi,  Hotrods  part number 8162, fits  Honda CR125  81 to 84 ,Suzuki RM125  84 to 86 ,any good Engineer can fit it , machine the crankshaft pin hole to suit larger crank pin .
cheers

Title: Re: 1974 cr125honda
Post by: dodgee on August 09, 2018, 09:19:44 am

ok thanks guys

Title: Re: 1974 cr125honda
Post by: bazza on August 09, 2018, 12:03:13 pm

saw a 125M rod kit on Marks or evil bay in the last week or so