OzVMX Forum

Marque Remarks => Spaniards (Bultaco, Ossa, Montesa etc) => Topic started by: mx250 on September 04, 2008, 09:17:18 am

Title: Monty Allen Keyed Cylinder Bolts.
Post by: mx250 on September 04, 2008, 09:17:18 am

A little time ago someone was asking about them, even discussing how to manufacture them. This might save you the trouble....

http://cgi.ebay.co.uk/MONTESA-COTA-AND-CAPPRA-CYLINDER-HEAD-ALLEN-KEY-NUT_W0QQitemZ330267638068QQihZ014QQcategoryZ122304QQcmdZViewItemQQ_trksidZp1713.m153.l1262

Says there's 10 available at about $10A each  :o (thank god I've got a few spare ;D)

Title: Re: Monty Allen Keyed Cylinder Bolts.
Post by: Lozza on September 18, 2008, 06:01:20 pm

I found a plentiful supply of these nuts much cheaper than these.

Title: Re: Monty Allen Keyed Cylinder Bolts.
Post by: montynut on September 19, 2008, 11:02:28 pm

Well go on tells us!!!!

Title: Re: Monty Allen Keyed Cylinder Bolts.
Post by: cappra on September 20, 2008, 03:51:08 pm

Yes, please do!  ::)

Title: Re: Monty Allen Keyed Cylinder Bolts.
Post by: Lozza on September 20, 2008, 04:12:38 pm

They need a quick skim on the lathe to ge the OD down a bit. They cost $3AUD each, if you want I'll do a run of them,which will bring the unit price down. ???I could just say go down to the local kart shop and look at the wheel nuts but that would be to easy and deprive me of some fun.