OzVMX Forum
Marketplace => For Sale => Topic started by: Wasp on May 22, 2018, 03:36:36 pm
-
Its time to clear a few shelves . I have alot of White Power mono springs to clear out . Some are OEM replacement springs ( 82-90) and most are to suit the WP 4681. ( Both ends 59 mm ID . They are in lengths of 260, 270, 290 , 300 and 320 . If its a specific spring rate you are after , just ask . They are new , but due to age and moving them around over the years , some may have slight marks . Cost $95 per spring or less for bulk buyers . 08 82848033 BH
-
did i read that right Walter, you have 2500 WP springs to to clear ?
whats a 4681 ? is that the model number of the shock ( don't know what model shock i have its on a 86' CR250 and 85' CR500 )
-
Yes Hoony ,way too many . Imagine the kids getting 600 springs each as a inheritance . LOL . I think they will prefer the folding stuff moor . Better to reduce them in price and move a few to make room for current stuff . 4681 is the normal WP shock like you have . (Non PDS )
-
Whats the best way to determine your current spring rate? Somewhere between 7.8 to 9.7 kg/mm.
-
Get it tested or find out from the manufacturer. Every good bike shop should have spring tester. Alternatively you can compress the spring 10 mm on the scales . That will give you the rate in kg / cm , or compress it one mm that will give you the approx . N/mm
-
Thanks Walter, Do you have them in 220mm in that range?
-
Please just PM or call with the following dimensions : ID top , ID bottom , Free length and spring rate required . They are going cheap and we need easy and quick transactions . ;)