OzVMX Forum
Marketplace => Wanted => Topic started by: MX? on October 28, 2017, 12:48:25 pm
-
Any chance someone may have one of these laying about collecting dust? ;)
For the early models.
-
Unfortunately they came out of the factory made from plasticine and loved to shear off. Was a couple of new ones early this year in Australia . Nice fellow seller wanted $1000 each.... Good Luck, best bet is to find a rare bottom end with shaft still in it.
-
Unfortunately they came out of the factory made from plasticine and loved to shear off. Was a couple of new ones early this year in Australia . Nice fellow seller wanted $1000 each.... Good Luck, best bet is to find a rare bottom end with shaft still in it.
Yes, found one on ePay..well used for $323 ::) Whole bike only cost me $250...so no thanks ;)
Looked at a complete bike the other day for $500, but it had a bolt welded to the kick lever to stop it coming all the way back which made me wonder if the spindle was broken internally or just the alloy case stop or whatever? Bike was running but frame broken in several places and really rough overall, so passed on it. Seems i should have jumped at it.
-
i know a gear cutter who could make you one but you need a model...no idea of cost. but as they are unobtanium...get a job lot done and flog the rest!!
-
i know a gear cutter who could make you one but you need a model...no idea of cost. but as they are unobtanium...get a job lot done and flog the rest!!
Arh! The old catch 22 scenario again. ;D